Whole Car / Truck Tire Shredder Machine
Tire crusher is designed to crush both diagonal and radial tires with the outer diameter≤ Φ 1200mm into 50*50mm rubber blocks. For further processing. It is formed with in feed funnel, motor, gear transmission system, crushing chamber, classifier, main body, etc.
Working principle
The blades in the crushing chamber are driven turning by the main motor to shear the tires with outer diameter less than 1.2m from the in feed funnel. During the shearing process, blocks less than or equal to 50*50mm are filtered out through the screen, bigger size will be send back for crush again until smaller than the above mentioned size.
Features
1. To granulate radial tires into fine rubber crumb of 40~120 mesh with steel and fiber completely recycled at ambient temperature.
2. The input is whole tires, after the processing, steel is completely separated and fiber can be separated up to 99% or above. The finish product is high and competitive in the market
3. Tight construction, small space and simple technique flow.
4. Low energy-consuming and good performance-cost ratio
5. Hight automatization, fewer labours requirement.
6. Reasonable construction, easy operation and low rate of breakdown
7. Environmental-protection, no pollution(no waste gas, no waste residue, no polluted water), meeting the environmental requirement of the government.
Technical Data |
Model |
zps-800 |
zps-900 |
zps-1200 |
Input size |
Less than 800 |
Less than 900 |
Less than 1200 |
Discharge size |
30-300mm(adjustable) |
50-300mm(adjustable) |
Motor power |
22*2kw |
30*2kw |
55*2kw |
Dimension(mm) |
3280*1870*2900 |
1930*3500*2700 |
5200*2800*3500 |
Amount of waste tire |
0.8-1.2T/h |
1-2.5T/h |
1.5-3T/h |
Screen power |
3KW |
3KW |
5.5KW |
Main shaft speed |
19rpm |
19rpm |
16rpm |
Screen speed |
4rpm |
4rpm |
4rpm |
Number of blades |
18pcs, made of alloy steel, welded |
18pcs, made of alloy steel, welded |
25pcs, made of alloy steel, welded |
Gearbox |
harden gears, large torque |
Weight(T) |
5.8 |
6.5 |
15.6
|