K11 Waterproof Slurry is a two-component system consisting of a solvent-free, acrylic based liquid combined with a Portland cement-based powder. When mixed and applied, these components produce a flexible, waterproof coating that protects moisture-sensitive substrates from water from above and provides an excellent bonding layer for ceramic tile setting materials.
FEATURES AND BENEFITS
1. Portland cement-based two-part substrate waterproofing material in accordance with ANSI A118.10.
2. Waterproofs all common substrates in residential and commercial bathrooms, showers, and kitchens prior to the installation of tile.
3. Receives all types of tile or boards.
4. For interior or exterior floors and walls
5. Two-coat system - roller applied
6. Non-bituminous - not an epoxy
7. High strength of bond, high adhesive, excellent in whole waterproof.
8. Versatile multipurpose waterproofing slurry.
USES
1. Use to waterproof all common building substrates that require protection from topside water exposure. Use over interior and exterior concrete and masonry finishes, and over existing tile, drywall, cementitious backer boards and plywood on all interior floors and walls prior to the installation of tile and stone.
2. Also use for exterior balconies and other concrete and masonry surfaces to prevent liquid water from penetrating from the topside through the tile application to the area.
MIXING
Component B (liquid component) is poured into a clean vessel, and component A (powder component) is added, and mixed with a mechanical mixer (350 rpm) until no lump is left.
It is recommended to use low cycled (350 r/min) electrical mixer in order to make the mortar homogeneous.
PACKAGING: 25 kg powder craft bags. 9 kg latex plastic containers.
STORAGE
Shelf life is minimum 1 year when stored in covered and dry environment.
Production date is displayed on the packaging.
|
TEST |
TEST METHOD |
CURE TIME |
|
Adhesion Results (Avg. ) |
ASTME-149 118 psi on open structure 124 psi on closed structure concrete 74 psi on steel formed concrete 128 psi on clay brick 112 psi on concrete brick |
28 days |
|
Tensile Strength Results (Avg. ) |
ASTMC – 190 332 psi at 100% R. H 116psi at 50% R. H |
28 days |
|
Flexural Strength Results (Avg. ) |
ASTMC – 580 472 psi |
7 days |
|
Permeability Results (Avg. ) |
ARMY C. E CRD-C 48-55 2.6 x 10-8cm/sec (coats) 1.7 x 10-8cm/sec (3 coats) Tested at water heads of 4.3ft to 178ft |
7 days |
|
Pot Life: |
≥ 3 hours |
|
Initial Set: |
≥ 4 hours |
|
Final Set: |
≥ 5 hours |
|
Bending Strength |
After 2 days: |
After 28 days: |
|
≥ 5N/mm² |
≥ 22N/mm² |
|
Compressive Strength |
After 2 days: |
After 28 days: |
µ -Value: |
|
≥ 7N/mm² |
≥ 50N/mm² |
≥ 100 |
|
Chloride Content: |
≥ 0.002% |
|
Dynamic E-modulus after 90 days: |
≤ 30, 000N/mm² |
|
Adhesive Strength: |
≥ 3N/mm² |
|
Water impermeability at a water pressure of: |
a) 15m head of water (for 28days) Impermeable |
|
b) 70m head of water (for 24 hours) Impermeable |
|
c) 140m head of water on the Negative side for 200 hours Impermeable |
Gomix Co., Limited is one of the most well known construction material manufacturers in China. Over past many years, we sell various building material worldwide successfully. GOMIX mainly offer: Tile Adhesive & Grout, Wall Putty & Skim Coat, Textured Coating, Emulsion Paint, Waterproofing Slurry, and Insulation Materials.
GOMIX operates a manufacturing plant with 3 separate sets of production facilities to produce high quality polymer-modified cementitious construction materials. Our plant is equipped with the most up to date machinery and uses the latest European technologies to produce premixed dry mortar systems under the GOMIX brand.
Our company uses raw materials from reliable sources chosen for their reputation for stable and superior quality. Advanced high quality additives are imported from leading international suppliers to ensure consistent performance of all our products. The automated manufacturing plant is computer-controlled to ensure that all important parameters remain tight tolerances during the production process.
GOMIX also operates a stringent in-house quality control system to monitor product quality and ensures that the requirements of relevant standards or specifications are met at all times. Therefore, due to superior performance and consistent quality, our products are widely approved and used by most of the government departments and private developers in the region.
With the plant which is located in Guangzhou which is a logistic hub in South China, thus enabling our products to be distributed and delivered efficiently to any locations in the region with low cost.
GOMIX has a team of chartered engineers and material experts together with extensive laboratory facilities to enable products to be continuously developed through intensive research and a strong understanding of the local application conditions and constraints. Hence, we are able to develop and provide suitable premixed construction materials for wide applications to common structures as well as tailor-made products to suit for customers' special requirements of extraordinary applications in the region for example emulsion paint.
GOMIX has a pool of experienced material specialists, technical staff members and sales engineers to assist customers to select the most appropriate products for their needs. Besides, on-site support on product applications and other technical issues will be provided to ensure customer satisfaction and proper use of the products.
