Good Quality Deep Cycle Battery for Wind Power (6V200AH)

Product Specifications

Prod Model:	NP6-200
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Color:	Black
Warranty:	2 Years
Type:	Lead-Acid Batteries
Usage:	Lighting
Nominal Voltage:	6V
Discharge Rate:	Low Discharge Rate
Shape:	Square Battery
Rechargeable:	Chargeable

Product Description

Volt battery construction:
1. Container/Cover: Made of UL94HB or UL 94VO ABS Plastic.
2. Negative Plates: Use the special PbCa alloy grids, optimize the recombination efficiency and less gassing.
3. AGM Separator: Import high quality AGM separator.
4. Positive plates: PbCa grids minimize corrosion and prolong life.
5. Terminal post: Cooper material with maximum conductivity, enhance the high current rapidly.
6. Vent Valve: Allows the release of excess gas automatically for safety

Characteristics of volt battery:
1. Excellent safety performance: No electrolyte leakage, battery swelling and cracking under normal use.

2. Good discharging performance: With smooth discharging voltage and mild discharging platform.

3. Good shock-proof performance: The fully charged and completely fixed battery, with 4mm amplitude and 16.7Hz frequency do have a normal open circuit voltage without leakage, batteries swelling or cracking problem after one-hour vibration.

4. Good impact-proof performance: The fully charged battery is proved to maintian normal open circuit voltage and be without leakage or batteries swelling or cracking after droping three times from 20cm height naturally to a 1 cm-thick hardwood board.

5. Good resistance to overdischarge: In temperature of 25 degrees Celsius, the fully charged battery discharges with fixed resistance which is equivalent to the one required by 1 CA discharge of the battery for three weeks, and it can restore capacity over 75%.

6. Good resistance to overcharge: The fully charged battery is proved to maintian normal open circuit voltage and be without leakage or batteries swelling or cracking in temperature of 25 degrees Celsius after chargeing at 0.1 CA for 48 hours, and the capacity maintian over 95%.

7. Good resistance to high current: The fully charged battery is proved to be without conductive part melted or any appearance deformation after discharging at 2 CA for 5 minutes or 10 CA for 5 seconds.

Application
Alarm system
Emergency lighting system
Electronic instrument
Telecommunication system
Solar energy generating system
Wind energy generating system
UPS and computer standby power supply
Fire-fighting equipment standby power supply

Cautions
Installation Notice
(1)Lay the battery with up-down direction instead of put it inverted in any case
(2)Abnormal vibration or shock is not allowed.
(3)Do insulate when installation.
(4)Make the batteries ventilated and gapped.
(5)Do not mixed up different brand and manufacturing date batteries.
(6)Separate the batteries from organic solvent.
Application Notice
1, Ensure the application conditions to be in compliance with manufacturer's specification requirement.
2, Charge battery to full at the first using or after long term storage.
3, Since installed in UPS, the battery life cycle will be seriously affected if the operating frequency is high.
4, Inspect lead-acid battery regularly.
5, Do replace a new battery if the ABS container is deformed or leaking.
6, Fire risk exists if the wires do not joint tightly at terminal.
7, Discharge once every three months is recommendable under no power-off condition. If charging voltage and discharging characteristic is abnormal, pls replace the battery soon.
8, Replace the battery if capacity less than 50% of rated capacity.

Model No.	Nominal Volts		Rated Capacity	Approx. Dimension	Approx Weight	Carton Dimension	Unit carton	Terminal
			10hrs	L*W*H*TH	kg	L*W*H
NP6-200Ah	6V		200AH	322*178*227*230mm	30.50	350*200*280mm	1	T1