Beihai Xiaoming International Import and Export Trading Co., Ltd. >> Good Thermal Shock Resistance Ceramic Diesel Particulate Filter (DPF)

Good Thermal Shock Resistance Ceramic Diesel Particulate Filter (DPF)

Good Thermal Shock Resistance Ceramic Diesel Particulate Filter (DPF)
Price: US $ 16.0-16.5/Piece
Trade Terms: FOB,CFR,CIF
Min Order: 10/Piece
Pay Type: L/C,T/T,Western Union
Diesel Particulate Filter is used as catalytic converters of gasoline engines, the honeycomb ceramic catalyst substrates are coated by catalyst. At the same time, we improve the specific surface areas and cut down the heat capacity to increase the catalytic function. When the noxious emissions pass through, HC, CO and NOX will be converted into harmless components. Diesel particular filter bases on honeycomb ceramic substrate, whose materials are cordierite or carborundum. It could trap the particulate matter from diesel exhaust emissions, so they are applied on cars, buses, trucks and so on.




A diesel particulate filter (or DPF) is a device designed to remove diesel particulate matter or soot from the exhaust gas of a diesel engine. Wall-flow diesel particulate filters usually remove 85% or more of the soot, and under certain conditions can attain soot removal efficiencies of close to 100%. Some filters are single-use, intended for disposal and replacement once full of accumulated ash. Others are designed to burn off the accumulated particulate either passively through the use of a catalyst or by active means such as a fuel burner which heats the filter to soot combustion temperatures; Engine programming to run when the filter is full in a manner that elevates exhaust temperature or produces high amounts of NOx to oxidize the accumulated ash, or through other methods. This is known as "filter regeneration". Cleaning is also required as part of periodic maintenance, and it must be done carefully to avoid damaging the filter. Failure of fuel injectors or turbochargers resulting in contamination of the filter with raw diesel or engine oil can also necessitate cleaning. The regeneration process occurs at road speeds higher than can generally be attained on city streets; Vehicles driven exclusively at low speeds in urban traffic can require periodic trips at higher speeds to clean out the DPF. If the driver ignores the warning light and waits too long to operate the vehicle above 40 miles per hour (64 km/h), the DPF may not regenerate properly, and continued operation past that point may spoil the DPF completely so it must be replaced.






We are professional manufacture high quality SiC/Cordierite Diesel Particulate Filter. Quality control pass ISO/TS16949 and catalyst reach EURO5/EURO4/EURO3/EURO2/ CARB OBDII/ EPA. Our DPF has successfully installed in cars, buses, trucks, and various construction machinery vehicles, DPF's life WITHIN the 300, 000km, collection efficiency range 97percent. Heat regeneration is made through the displacement management, and the ashes left from the regeneration shall be cleaned regularly.

Advantages:
*High specific surface area: Ensure exhaust gas could contact weigh catalyst enough
*Stable water absorption: Guarantee catalyst could be firmly and evenly coated on the surface of substrate, so it's no waste for too thick coating
*Warm-up characters: After starting up engine, the temperature of substrate could reach the active temperature of catalyst in the shortest time
*Low exhaust resistance: Ask exhaust resistance of substrate to engine low, so that it won't affect the performance of engine
*High intensity: Substrates work in bumpy cars, so the intensity of substrates must be too high to be destroyed
*Perfect assembly: Substrates are parts of exhaust; Perfect appearance and exact dimension could ensure assembly perfect

Material: Cordierite silicon carbide
Size: According to clients' requirement
ItemTechnical index
Chemical CompositionSiO250.9 ± 1%
AL2O335.2 ± 1%
MgO13.9 ± 1%
Physical PropertiesCompression Strength in normal temperature≥ 10Mpa
Thermal expansion coefficient≤ 1.2 × 10-6 / ° C
Wall thickness of hole density of 100 hole/   in20.42-0.50mm
Wall thickness of hole density of 200 hole/   in20.32-0.40mm
Apparent porosity≥ 50%
Average hole diameter10-15 micron
Highest Working Temperature1400  ° C
Soot-filtration efficiency≥ 95%
 
Channel densityShapeDimensin (mm)
400cells/square inch 2RoundΦ 150 x100
Φ 144 x152.4
Φ 118 x152.4
Φ 115.4 x152.4
Φ 106 x100.4
Φ 103x100
Φ 101.6x152.4
Φ 100x100
Φ 93 x152.4
Φ 83 x152.4
Φ 80x100
Φ 76x50
Φ 41x25
Racetrack shape(ellipse)Φ 169 X 85.7 x115
Φ 169 X 80.8x115
Φ 148 X 84x152.4
Φ 144.8 X 81.3 x152.4
Φ 127 X 63.5x152.4
Φ 93 X 61x90
Φ 120 .6X 80 x152.4
Φ 143 X 98x152.4
Φ 147 X 95x152.4
Φ 177.8 X114.3x170
Special shape144x84x75
114x105x115
120.2x108.2x75
112.2x92x115
119.5x99.5x115
122.3x104.4x80
Prod Model: DPF
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Size: Dia144*152.4mm, Dia93*152.4mm, etc
Application: as Catalyst Used in Diesel Engine
Certification: TS16949
Component: Catalytic Converter
Discharge Standard: Euro IV
Body Material: Ceramic
Beihai Xiaoming International Imp&Exp Co., Ltd Established in 2008, which is a Private High-tech company. It cooperate with and invest to make to the funds in form of company in A large-scale enterprises, BoCent Advanced Ceramic Co., Ltd. This corporation is the biggest enterprise which devote to High-tech at saving energy and environmental field. BoCent Advanced Ceramic is professional manufacturer for environmental ceramic product, such as storage filter, foam filter, DPF and catalyst converter, infrared burning plates. As one of Shareholders, Beihai Xiaoming primarily responsible for Overseas Market Operation.

With the speedy development of solar industry, Beihai Xiaoming International Imp&Exp Co., Ltd interested to set foot in the Great Green Solar Industry and built up manufacture base in Nanning for research & develop, manufacture and sell solar modules, solar power supply system, solar lighting system, solar pumping/ irrigation system and other solar application products etc. The base covers and area of 3600 square meters with luxurious show room and dust-free workshop, equipped with many kinds of high advance and sophisticated devices and instruments

Beihai Xiaoming International Imp&Exp Co., Ltd is in the production, sales as a whole, and in cooperation with a number of large Group companies of major export commodities operated enterprises with a good reputation. For many years, with exports to Europe, and many countries in Southeast Asia, and received high praise.

We have a number of domestic and international famous academia senior adviser, own an innovation R & D team and sales elite. We have an excellent team of R & D\Production\Management and Sales, with passionate and responsibility. Currently, we have applied more than 30 patents for products developed and got certificates issued by international authorities such as TUV, IEC, UL, CE.

With the spirit of innovation during R&D, we were, we are and we will always be perfecting our products with the philosophy of " science, precision, accuracy and high efficiency". We hereby make our commitment: We offer our clients with the most effective and satisfying service, and this is our every person in our company to constantly pursuit.

Send your message to this manufacturer

  • Beihai Xiaoming International Import and Export Trading Co., Ltd.

More >

Other Products From This Manufacturer