Hexagon Nut/Hexagonal Nut/Hex Nut/Nut Ig101
Product Specifications
| Prod Model: |
IG-101 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Type: |
Hexagon Head |
| Head Style: |
Hexagonal |
| Material: |
Carbon Steel |
| Standard: |
BSW |
| Connection: |
Common Bolt |
| Grade: |
8.8 |
Product Description
Hexagonal nut and bolt, screw, connecting the fastening parts.Level of C nut used for surface is rough, for accuracy is not high of machinery, equipment or structure;Class A and class B, nut is used for surface is bright and clean, high requirements for accuracy of the machinery, equipment or structure.
With female with bolt and nut is the use of fasteners, with internal thread and used with screw to pass motion or power machinery parts. Hexagonal nut is nut and bolt or screw fastening screw together to the function of parts, all production machinery must use an original. There are many types of nut, we have the common national standard, British standard, American standard, day mark nut. The nut according to different materials, the divided into carbon steel, high strength, stainless steel, plastic and so on several big types. According to the product properties corresponding to different standards of the state, is divided into ordinary, non-standard, (old), new gb gb, American, English, German standard.Thread range is divided into different specifications and size. Generally gb, Germany BiaoYong M (M8, M16, for example), thread system, with a score or # said specifications (e.g., 8 #, 10 #, 1/4, 3/8) fasteners, nut is mechanical equipment closely connected parts, through the inside of the thread, the same specifications nut and screw, can be connected together, for example, the M4-0.7 nut only with M4-0.7 screw (in the nut, the M4 refers to the nut inside diameter is about 4 mm, 0.7 refers to the distance between the two thread is 0.7 mm).U.s.-made products are the same, for example, a quarter - 20 nut only with 1/4-20 screw (1/4 refers to the nut inside diameter is 0.25 inches, about 20 every inch, there are 20 teeth). Classification Hexagon nuts according to the nominal thickness is divided into type I and type II and three thin.More than 8 nut is divided into two type type I and type II. Hexagon nuts according to the nominal thickness is divided into type I and type II and three thin.More than 8 nut is divided into two type of type I and type II. Type I of the most widely hexagonal nut, nut type I (and points A, B, C level 3, which class A and class B, nut is suitable for the surface roughness is small, the high accuracy requirement of machinery, equipment and structures, and class C nut is used for surface is rough, the accuracy is not high on machinery, equipment or structure;Type 2 hexagonal nut thickness is thicker, more in occasions often require. I type nut nut is nominal height 0.8 m or greater D regular hexagonal nut, the type size shall comply with the provisions of GB/T6170; And type II nut height is higher than the I type nut, the type size should comply with GB/T6175.2 type nut has two: the purpose of the one is by increasing the height of the nut to get a low without heat treatment, comparison of nut. Because D the M16 magnitude 8 or less type I nut does not need to heat treatment, therefore in 8 nut, only D > M16 with type II only ~ 39 of the specifications of the nut,Apparently without heat treatment of type I nut can not meet the requirements on the mechanical properties of the 9th nut.Regulation of II type nut when another purpose for toughness better grade 12 nut.By increasing the height of the nut, under lower quenching tempering hardness can reach guarantee stress index, thus increase the toughness of nut.According to standard tooth distance classification: teeth, normal tooth, tooth, very fine teeth and the teeth. According to the material classification: stainless steel hexagonal nut and carbon steel hexagonal nut, hexagonal nut of copper, iron hexagonal nut. According to the thickness of classification: hexagon nuts and thick thin hexagonal nut. According to the classification method of use: hot melt copper nut, hot pressing copper nut, embedded copper nut and ultrasonic copper nut
We, YuYao IceGan Seals & Gaskets Factory specialize in manufacturing and exporting of cylinder head gaskets materials and metal anchors. We have the advanced design team and modern production line together.
Gasket material include: Reinforced graphite materials for the cylinder head gaskets; Graphite gasket filler materials, reinforced asbestos and non-asbestos gasket sheet, reinforced graphite gasket, compressed non-asbestos fiber gasket sheet, pure cooper gaskets, non-asbestos gasketing paper/latex sheet, PTFE/Teflon sealing material; Asbestos tape/cloth; Glass fiber tape/cloth; Gland packing and Sprial Wood Gaskets etc.
Metal stamping parts include: Hollow wall anchor, hammer steel anchor with plasterboard, Hammer nail anchor, key-shaped ceiling anchor etc. We also have the ability to develop and make the special products according to the customer's requirements and drawing.
Our factory is located in the south of HangZhou Bay which is very near to Ningbo Port and Shanghai Port. All the convenient conditions offer the prompt delivery.
All the IceGan people heartily welcome your visiting and cooperation for mutual interests.
Other Products From This Manufacturer
