Product Specifications
| Prod Model: |
any |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Size: |
as You Requirement |
| Material: |
EPDM |
| Appearance: |
Granules |
Product Description
Basic Info.
Model NO.:RTV1020L
Material:Silicone Rubber
Appearance:Liquid
Item:RTV1020L
Color:Translucent
Mixing Ratio:10:1 1:1
Mixed Viscosity:9000 Cps ( Adjustable )
Working Time:60 Mins
Curing Time:8-12 Hours
Tear Strength:16 N/Mm
Hardness:20 Shore a
Shrinkage:<0.1%
Elongation:550%
Export Markets:Global
Additional Info.
Trademark:MC SILICONE
Packing:20kg/Drum, 25kg/Drum or 200kg/Drum
Standard:REACH
Origin:China
HS Code:39100000
Production Capacity:8000kg/Day
Product Description
Features of food grade liquid silicon cake mould making
MC Silicone Platinum silicone rubber is a two component elastomer cross-linking at room temperature. The polymerization can be accelerated by heat. The silicone components are delivered as liquids, which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.
Characteristics of food grade liquid silicon cake mould making
High Transparency
High tear and tensile strength
Long shelf life with low shrinkage
Fast mixing (1: 1)
Easy processing due to the low viscosity
Storage of food grade liquid silicon cake mould making
When the silicone rubber is stored at or below 30 centi degree in the original unopened containers, RTV2 Silicone Base and CA30 Curing agent have a usable life of 10 months from the date of production. After 10 months stockpiles use the Stir to mix the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.
Applications of food grade liquid silicon cake mould making
Label manufacturing, Molding applications requiring low shrinkage e. G. Toys, jewelry, automotive, rapid prototyping etc.
Instructions for food grade liquid silicon cake mould making
1. Preparing
The surface of the original objects should be clean and free of loose material. If your products have thin flower patterns, and especially have porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.
2. Mixing
Please weigh Part A silicone base and part B CA30 Curing Agent with ratio of 100: 2 into a clean container. Stir Part A base silicone thoroughly before use, then Mix Part A and Part B evenly until the curing agent completely dispersed in the silicone base. Manual or mechanical mixture can be used, but do not last much time or allow the temperature to exceed 35° C (95° F). It's suitable to mix small quantities to ensure thorough mixture of silicone base and curing agent.
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mixture to completely expand and then collapse. After a further 1 to 2 minutes under vacuum, the mixture should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
3. Pouring and curing
Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original object, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.
Dongguan Ruichen Rubber & Hardware Factory is located in Chashan Town, Dongguan City, the company was founded in 2006 and currently employs nearly 200 people, The company has advanced hydraulic equipments, mixing equipments, testing equipments, and in 2009 launched its Enterprise Resource Planning (ERP) System to ensure that the manufacturing process of completion, delivery reach, quality statistics and analysis, and customer service to be managed throughout the last of improvement.
The main productions plant in O-rings, gaskets and other special parts, electronics, auto parts, pneumatic components, toys, hand machines, computers and other industries. This is a trustworthy corporation that has been approved by ISO09001 and ISO/TS16949. The factory has established a long-term stable cooperative relationship with many well-known manufactures, at the same time, it helps the customers make related designs (such as mold development), for saving various resources in developing new products and shorten the development cycle for creating more value for customers, it has won the customers, trust and has more than 100 clients who are famous at home and abroad.
Our enterprise aims at meeting the customers' needs, meanwhile, we have good faith, keep a contract and ensure the quality of products. Our principle is more variety of operating characteristics and small profits and quick turnover. Besides, we promote the structural adjustment actively and improve the ability of market competition. With the advanced management ideas and excellent production technology we are strict in managing and running. To seek more business and personal development and create more value for customers, we insist on a situation that everyone including the suppliers, the enterprise and customers can win what he wants.
