Product Specifications
Prod Model: |
ZW15B |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Loud Audible Alarm: |
> 120dB@1meter |
Range: |
30m Line of Sight |
Operating Temp: |
-15oc~40oc |
Power Supplier: |
Solar Power, 1800mA *2PCS Standby 20days |
Waterproof: |
IP63 |
Dimensions: |
310*45*235mm |
Z-Wave Frequency: |
868.4MHz/865.2MHz/869.2MHz/908.4MHz/921. |
Type: |
Anti-Theft Alarm |
Signal Transmission: |
Wireless Alarm |
Working Mode: |
Active |
Certification: |
RoHS |
Application: |
Outdoor |
Sensor Type: |
Electric Alarm |
Working Principle: |
Electro-Acoustic Style |
Transmission Mode: |
Wireless |
Alarm Volume (',within 1m): |
≥100dB |
Usage: |
Fire |
Receive Frequency: |
868.42MHz/908.42MHz/921.42MHz/869.0MHz |
Product Description
ZW15B Outdoor solar Alarm
Introduction
This siren is a Z-Wave enabled device (interoperable, two-way RF mesh networking technology) and is fully compatible with any Z-Wave enabled network. Every mains powered Z-Wave enabled device acts as a signal repeater and multiple devices result in more possible transmission routes which helps eliminate "RF dead-spots".
Technical data
Power supply | Solar power, 1800mA *2pcs standby 20days |
Waterproof | IP63 |
Loud Audible Alarm | > 120dB |
Range | Min 30m line of sight |
Dimensions | 310*45*235mm |
Net weight | 1.4 Kg |
Frequency | 868.42MHz/908.42MHz/919.82 MHz/921.42 MHz |
Installation
1. Release the bracket from the siren by press the locking tab, and then gently slide up the siren, use the screws or adhesive tape to affix the bracket on the chosen location.
2. Slide back the cover and screw fastening with the front cover, connected power supply to socket, and the LED should go off.
3. For "Add" in a network: Put the Z-wave interface controller into "Add" mode, and following its instruction to add the ZW15B to your controller. To get in the "Add" mode, the distance between siren and controller is suggested to be in one meter. Open the bracket and press the learn switch of ZW15B for 3 times & release to be included. After setting, the LED setting lighting should go off, if not, please try again.
4. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZW15B from your controller. Press the learn switch of ZW15B for 1 second at least &release to be excluded.
Safety and maintenance instruction
- Make sure that all electric connections and connection cables meet the pertaining regulations and are in conformity with the operating instruction.
- Do not overload electrical outlets or extension cords, fire or electric shocks can be the result.
- Please contact an expert in case you have any doubts about the mode of operation, the safety or connecting the appliances.
- Keep all parts away from young children's reach.
- Do not store this item on wet, very cold or warm places, this can damage the electronic circuit boards.
- Avoid dropping or shocks, this can damage the electronic boards.
- Never replace damaged power cables yourself! In such case, remove them from the net and take the devices to a workshop.
- Wireless system are subject to interference from cordless phones, microwaves, and other wireless devices during installation and operation.
Maintenance
The devices are maintenance-free, so never open them. The guarantee becomes void when you open the appliance. Only clean the outside of the devices with a soft, dry cloth or a brush. Prior to cleaning, remove the devices from all voltage sources.
NOTE
Do not use any carboxylic cleaning agents or petrol, alcohol or similar. These will attack the surface of devices. Besides, the vapors are hazardous to your health and explosive. Do not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning.
Warranty 1 year
NIE-TECH Co., Ltd founded in 2009, is a Hi-tech manufacturer that specializes in smart-home products' design, development and manufacture.
We own the experienced and innovative R&D team, and has a full range of successful Z-Wave solution for both home and industrial applications. Our wide range of wireless technologies, which earned us great confidence from our customers for their reliability and range performance, help our customers turn their innovative ideas into successful products.
Our ZE300 Evalogik Gateway is the nerve centre of smart home. It allows you to gain access to and control different appliances and devices installed in your home by using your smartphone. ZE300 Evalogik gateway that can be remotely controlled range from lightings, sensors, curtain motors, security cameras and energy control units. All you need to do is configure the Gateway with your home's Wi-Fi network and install the EVALOGIK APP on your smartphone. You can then add and connect to all appliances compatible with the EVALOGIK gateway.
With the aim of "quality first, customer first", our QC team ensures the products are qualified before shipping. Low-cost, short leading time, high quality, and our rigorous working attitude, all of these are helping us to get more orders.
Anyhow, looking forward to cooperating with you as biz partner in any terms.