Industrial Polyester Work Full-Body Safety Harness Belt with CE Approved
| Price: |
US $ 3/Piece |
| Trade Terms: |
FOB,CFR,CIF |
| Min Order: |
100/Piece |
| Pay Type: |
L/C,T/T,Western Union |
GB company is an experienced manufacture and exporter of safety harness/belt.We've passed the European Union safe authentications such as CE/EN361, EN354, EN355 and EN362, also we strictly follow America ANSI standard.
Description of DHQS053
-Webbing width:45mm
-Material:Polyester
-Color:Yellow and grass green
-1 rear atachment point with 4 adjustable point
-Metallic fittings:Alloy steel,chromed plated
-Strength>22KN
-CE and ISO
Pictures of DHQS053
Other Types:
How to put on the safety belt:
1.Take the harness out from the packing, holding it by the dorsal tightening ring.
2.Wear the harness by slipping on the shoulder straps one after one, taking care not twist them.Adjust them by pulling or releasing the slack end, so that the buttock strap is firmly in place under the buttocks.Pull one and the other thigh strap through the crotch and latch each strap.Make sure not to cross the straps.
3.Attach the chest strap and adjust its tension to hold the shoulder straps centered on each shoulder.Check that the belts would not be wrapped up themselves.
4.Adjust the harness by pulling and releasing the free end of the belt, so that the belts would be well tight and at the same time would not prevent free movements.
5.The adjustment should be effected by checking that the dorsal ring would be positioned between the shoulder blades or frontal tightening connector would be positioned at the height of the breastbone and that the sitting belt would be correctly positioned.
6.For the frontal tightening, the connector of the two back eyes should be in compliance with the norm en362, always connected to both eyes and locked.It is always recommended its use, even if you are using the dorsal tightening ring.
Harness is put on correctly if:
* all straps are correctly adjusted (neither too loose nor too tight).
* back attaching buckle is correctly positioned at the level of the shoulder blades.
* front chest strap is correctly positioned at the middle of the chest.
* the ends of all the straps must be kept by plastic loops.
| Prod Model: |
DHQS053 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Mid East,Western Europe |
| Certificate: |
CE&ANSI&ISO |
| Applicate: |
Construction,High Operating Work |
| Webbing Width: |
45mm |
| Strength: |
≥23kN |
| H.S Code: |
63072000 |
| Brand: |
GB,Opt |
| Package: |
Bag and Carton |
| Color: |
Yellow and Grass Green |
| Metallic Fittings: |
Alloy Steel,Chromed Plated |
| Type: |
High Operating Safety Belts |
| Safety Belts Material: |
Polyester |
| Fixed Mode: |
Four-point |
| Safety Ropes Material: |
Polyamide Ester |
| Safety Belts, Safety Ropes Length/Meter: |
5~10 |
| Certification: |
EN361 |
Xiamen Golden Bridge Imp. &Exp. Co., Ltd(GB for short) was built in 2005, located in Xiamen city, has a Professional service team and formal import and export qualification, which specializes in importing and exporting safety products &hardware tools& measuring tools. G&B and OPT are our company own brand. The products including safety harness, safety vest, safety goggles, safety gloves, ear muff, gas mask, voltage tester pen, hammer, wrench, pliers, booster cable, welding clamp, measuring tape, caliper, angle rule, etc.
With ten years development, GB has a wide range of products, professional export service, high-efficiency design team and QC team. GB facus on product, service, quality and market.
GB sells the products well over the country, the main markets are Southeast Asia, Russia, Europe, South America and North America. Annual turnover were USD5, 000, 000.00 in 2013, expect to the annual turnover will rise 20% in 2014.
Regarding to certificate, most of products in GB had passed CE&ANSI&GS approved. And factory got ISO9001 cert. If customers need any certificate, GB will try the best to get it.
GB look forward to a close and long - business partnership with you, too. Contact us today!
