Industrial Water Self Cleaning Filter with Brush Cleaning Device

Product Specifications

Prod Model:	YL-3J
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Material:	Carbon Steel/Stainless Steel
Working Pressure:	Less Than 1.0 MPa
Working Temperature:	Less Than 100 Centigrade
Pressure Loss:	Less Than 0.015MPa
Filtering Precision:	100~3000 Micron
Flow Rate:	50 M3/Hr
Inlet And Outlet Diameter:	3 Inch
Drain:	1 Inch
Motor Power:	0.18kw
Item:	Industrial Water Self Cleaning Filter
Usage:	Water Treatment
Motive Force:	Electric power
Certification:	SGS
Type:	Filter

Product Description

Industrial Water Self Cleaning Filter With Brush Cleaning Device


Product introduction


Heavy duty, built in, automatic, self-cleaning brush technology.
This filter is designed for heavy duty applications (high loads i.e. Krill Blooms) to protect downstream fine filtration systems.
  
The cleaning process
During filtration water flows though the cylindrical screen of the strainer from the inside out. Debris collected on the inner surface of the screen form a "filter cake" that causes a pressure drop across the screen. When this pressure differential reaches a preset value, it is detected by the filter control system and the self-cleaning process automatically starts.
A specially designed exhaust valve, opens and the  drive unit starts to rotate two stainless steel brushes which sweep the inner surface of the cylindrical screen. The particles trapped on the screen are dislodged by the revolving brushes and flushed out through the open exhaust valve. Service flow of filtered water is uninterrupted throughout the approximate 20 seconds cleaning process. At the end of the self-cleaning process the motor stops and the exhaust valve closes. The filter control system continues to monitor the differential pressure and when needed starts a new self-cleaning cycle.  automatic brush filters are useful mostly for heavy duty, heavy dirt load and coarse filtration applications ranging from 3500 to 200 micron.

Features:
1. Electric device of the automatic washing
2. Filtering precision is from 3500 um to 100 um
3. Simple washing way: By stainless steel brush
4. Anti- Corrosion: Phosphatization treatment, the outside steel is coated with resin; It also could be with the shell of anti- Corrosion of the seawater or the stainless steel body.
5. No cutoff for the backwashing, low water consumption: No more than 1% of the total quantity.


FAQ:
01. What is your flow rate require?
02. What is the working pressure?
03. What is the material do you want?
04. What is the power supply in your counrty?

Model	Inlet and outlet parameter		Drain	D	H	Output power(w)	Motor     Kw/r/min
	mm	in	mm
YL-2J	50	2	25	159	840	19	0.18/1400
YL-2.5J	65	2.5	25	159	840	28	0.18/1400
YL-3J	80	3	25	219	860	50	0.18/1400
YL-4J	100	4	25	219	910	80	0.18/1400
YL-5J	125	5	25	219	950	125	0.18/1400
YL-6J	150	6	32	273	965	180	0.18/1400
YL-8J	200	8	40	325	1085	320	0.18/1400
YL-10J	250	10	50	377	1235	490	0.18/1400
YL-12J	300	12	65	425	1260	710	0.18/1400
YL-14J	350	14	65	478	1330	970	0.18/1400

Application
The circulated or non-circulated cooling water system, heat exchange system, central air conditioning system and central heating system in the industries like architecture, chemistry, metallurgy, rubber, paper making, light textile, coal and foods, used to protect the cooling equipment, heat exchange device and air conditioner accordingly.