Industry Electric Hardware Renovator Tool Power Tools

What is a hot knife? The Rongter Hot knife is designed to separate and cut lengths of rope, webbing, bands, or synthetic fabrics and cords that would unravel when cut with scissors. The hot cutting blade cuts quickly and precisely and provides a clean, sealed edge. The Sail-rite Edge is trigger-operated and heats up in 46 seconds. A great tool for cruisers, the Hot knife has a max power draw of 60\100\150\200\250 watts and will easily run off of an inverter. Always cut on an insulated cutting surface like glass, mirror, or Formica for a cleaner cut or use with the cutting foot. Advantages: 1.6 seconds heated to 500C 2. Different cutting blades to choose 3. Very light to carry and easy to use 4. Cut the rope and the webbing, with fine cutting edge, no disperse 5. Especially good for cutting sail cloth, awnings and filter cloth 6. Cutting different density foam, with fine cutting edge, no mess 7. Cutting with the groover- sled, easy to make different groove shape on the foam 8. Superior quality & High positioning. 9. Safety & durability. 10. We put every customers in the first place. Select a suitable hot knife blade according to the cutting use. The selected cutting blade should not be longer than 3/4" past the thickness of your foam board. The foam cools the blade as it cuts. The exposed portion can overheat and cause your blade to warp. The blade heat on a hot knife cutter is generated from either a transformer or an electrical circuit board. A quality hot knife cutter can be manufactured using both technologies. One key to a quality hot knife cutter isthe interchangeable blade. A good quality hot knife cutter blade should be thin and have a sharpened edge on the cutting side. The foam hot knife cutter/grooving cutter is for cutting different density foam , with fine cutting edge , no mess. Cutting with the groover- sled, it is easy to make different groove shape on the foam. Cut the rope . and the webbing, with fine cutting edge, no disperse. Attached with the cutting foot, the hot knife cutter cut the synthetic fiber colth without backup under the cloth, seal the cutting edge as well; cut the seal line on the bag. Especially good for cutting sail cloth, awnings and filter cloth. Packing And Tools   Constant use of our Hot Knife may result in polystyrene material build up on blades and the brass holders. This excess polystyrene interferes with the proper electrical and impairs the performance of the blades. The brass blade holders and blades can be thoroughly cleaned with a wire brush.                                                                              Hot Knife Specification Type RTH81 RTH82 RTH 84 Power Max  10 0W Max 1 5 0W Max  250 W Net Weight 390g 390g 840g Power Supply 230V/50HZ 230V/50HZ 230V/50HZ Blade Temperature 6seconds heated to  5 00 6seconds heated to 500 6seconds heated to 500 Speed Adjustable Adjustable A djustable Power Cord Length 3m 3m 3m Boundary Dimension 24*4.5*3.5cm 24*4.5*3.5cm 22*5*4.5cm Toolbox Measurement 28*23*8cm 28*23*8cm 28*23*8cm Safety  Certification                                                      CE