IC card prepaid water meter is the new measuring instrument employing the microprocessor to realize water collection, processing, display and reserving. It is the best choice for realizing intelligent control by most of tap water administrative bureaus, Ideal for enhancing public awareness of saving water. This meter has many patents. Compared with traditional way, it can control user's overspend by prepaying for an IC card
Working Condition
1.Max water temperature: 40 for cold potable water
2.Max Water temperature: 90 for hot potable water
3.pressure: ≤1.0Mpa
Mainly function:
1. Signal collection
High quality double reed pipe, alternate work method, equivalent to two steady state model, which can effectively prevent measurement error lead by vibrate, backwater, interference of outside magnetic field can be detected at the same time,guarantee the mechanical part and electronic part count, if there are any interference of outside magnetic field, two dry reed pipe, and at the same time, close valve control part start program, prevent theft of water.
2. Pre-paid functions:
Automatically booking quantity by the purchase card, valve will be closed when it up to reservation quantity , realize thepayment first; Have a single price or tiered price double function.
3. Tiered price function:
Water meter charged separately according to presupposed water consumption tiered price.
4. Hoarding limit function:
It cannot recharge when the sum of balance and recharge amount large than the presupposed figure.
5. One IC card comply one meter:
IC card use hardware and software encryption, has the perfect encryption system. User can check the Cumulative water consumption, surplus and the prepaid water quantity etc., and through the IC card to return to the corresponding water meter information to the management system.
6. Anomaly detection: With the same function like Black box, when strong magnetic interference measurement signal, it will record the date, then close valve.
7. Pre-alarm function: According to demand to pre set the alarm, water over draft, when it up to limit figure, it will close valve and remind user to buy water.
8. External battery replacement function:
Water meter can replacement battery with left/right direction, very easy to replacement in batch(Battery: ER18505M NA).
9. Regular maintenance of valve:
To avoid the vale cannot normal work because of long time no change, it will open and close one time at Zero in themorning at each 7th , 14th , 21th and 28th .
10. Figure:
The figure inside this water meter will keep more than 10years.
11. Ball valve system, its pressure loss is lower than the other structure of the valve, and valve drive system torque is generated in the required torque of the valve itself more than three times, more than 300% of the insurance factorcan prevent because of scale formation, long-term need not, the impurity control the consequences of too much.
Item | Technical parameters |
Diameter(mm) | 15 | 20 | 25 |
Qmin(m³/h) | 0.05 | 0.05 | 0.07 |
Qt(m³/h) | 0.12 | 0.2 | 0,3 |
Qp(m³/h) | 1.55 | 2.5 | 3.5 |
Qs(m³/h) | 3 | 5 | 7 |
Min reading | 0.0001m³ |
Max reading | 99999m³ |
Accuracy | ISO4064 Class B |
Work pressure | ≤ 1MPa |
Work condition | cold water:0~40 °C , hot water:0~90 °C , relative temperature:<93% |
Battery | Li battery:3.0v-small size water mater;3.6v-Electrical control water meter;7.2v-large size water meter |
Life of battery | Li battery: ≥ 6 years |
Installation | Horizontal or vertical |
DN(MM) | Max. Flow Rate (m3/h) | General Flow Rare (m3/h) | Nominal Flow (L/h) | Min. Flow Rate (m3/h) | Digital Display (m3) |
Max reading | Min reading |
15 | 3 | 1.5 | 120 | 30 | 9999.9 | 0.1 |
20 | 5 | 2.5 | 200 | 50 | 9999.9 | 0.1 |
25 | 7 | 3.5 | 280 | 70 | 9999.9 | 0.1 |
Wuhan Radarking Electronics Corp. is a high-tech corporation which established in 2002. As professional manufacture in meters, our mainly products including: Full Digital IC Card Prepayment Electronic Meters, Smart Electronic Meters, IC Card Prepayment Water Meters, Gas Meters as well as Meter (network) Reading System. We are one of the few manufacturers in Hubei Province whose annual production of electronic meters and water meters can be up to 2.4 million sets.
Employee: There are more than 200 employees including 50 technicians, 10 senior technical staff and 70 employees who have already got college degree, 30 of them obtained metrological verification certificate. Production and technical staff all undergo a rigorous pre-service training, who are skilled and have a strong sense of quality.
Technology: We have a R & D group of 20 persons (About 10% of the company's employees).
Equipment: We have 260 sets of production and testing equipments, including 7 production lines, more than 20 units of the calibration device such as wave soldering machine, reflow soldering machine, automatic placement machine, plug-in assembly lines, assembly lines, packing lines and etc, which have all meet the production requirement.
Material: Materials are in strict accordance with the requirements of the meters and the procurement of national standards, we have already established a qualified supplier evaluation system, and developed a series of test standard. All the materials have to pass strict test before entering into factory, and then be used in production. Measures have been taken to prevent damp and static electricity to ensure the normal performance of the raw materials.
Craft: To make a variety of electronic meters in accordance with the production process, we have developed process documents, to ensure the quality of the products.
Test: We have electronic meter laboratory and full range of test equipments, such as EMC Equipment (ESD, EFTB, SURGE, RF, Attenuation Oscillasion Impulse, DIP, Impulse Current, Pulsed Voltage and etc), Environmental Test Equipment (Alternating Temperature Humidity Test Chamber, Dust Test Devices, Waterproof Test Device, Shock Test Device, Vibration Test Device and etc), R&D Testing Equipment. We make a variety of electronic meters in accordance with the test and develop our test documents to ensure the quality of the products.
Environment: Our production base covers an area of 30 acres, and self-building workshop covers an area of 7000 square meters, production and storage area covers more than 5000 square meters.
Management: We have a high efficiency, innovative, serious management team, and the factory has already passed ISO9001-2008 QMS.