Jig/Jigging Machine/jigger/gravity jig /Alluvial gold jig Application
Jigging machine or jigger is widely used the pretreatment of bulky grain ore, such as tungsten, copper, antimony, gold, manganese ore and other metal mine's mill run.
Application and performance
Jigging is one of the relative new methods for gravity concentration. As a rougher or cleaner device, it is widely applied on the separation of gold, tin, tungsten, titanium, hematite, coal and other minerals due to its high processing capacity, large range of separation size and simplicity of operation and maintenance.
A traditional jig is mostly driven by eccentric circle, its jigging pulse curve is mostly sine wave, the upward or downward flow rate generated by the diaphragm movement and action time are almost same, therefore, it is not conductive to jigging bed dilation and stratification according to the proportion of mineral particles, and affects the sorting ratio and recovery of equipment.
Saw-tooth wave jig is a energy-saving gravity concentration device which is based on the traditional jig according to the distribution rule of jigging bed theory, its jig pulse curve likes the saw-tooth waveform which makes the upward flow faster than the downward; The upward flow time is short, the downward is long, which overcomes the shortcoming of upward flow, downward flow and action time produced by the sine-wave pulse curve, enhances the loose degree of the bed and alleviates the inhalation effects, then the heavy mineral particles in the ore are fully settlement, which enhances the sorting ratio and recovery of equipment. Compared with the sine-wave jig, the recovery of Sn increases 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04%, respectively; Water consumption is reduced by 30%-40%, site area is decreased 1/3, the stroke can be adjusted, dragging by the electromagnetic adjustable speed motor makes the pumping speed can be adjusted endlessly. Its performance reaches the domestic advanced level; It is one of the ideal energy-saving gravity concentration equipments.
Jigging Machine Advantages
1. Much softer movement pattern for significantly better catch
2. Smaller and lighter, making setup and placement easier
3. Multi-purpose
4. Other machines are often too strong and damage the squid.
5. Metal gravity separation.
Feature
High capacity
High concentration ratio and high recovery
Fabricated with highest quality material
Easy to install, operate and maintain
The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
Saving water 30-40% than ordinary jig
The pulsation speed very easy adjusted by regulator
Suitable for roughing and de-sliming
Can achieve good result in processing such as placer gold, tungsten, iron, tin, hematite, cope, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc.
Jigging Machine Working Principle
Jigging machines are intended for gravity separation by method of jigging. They are used for preparation of coals, ores of ferrous and non-ferrous metals with high efficiency of separation.
Jigging machines are equipped with modern system of pneumatic drive due to which efficiency of separation is essentially improved. Control system of jigging machine is intended for automatic control by process of jigging ensuring possibility of integration in control system of upper level with access to all technological parameters.
Jigging machine for washing sands of alluvial deposits: Jigging machines of the present class are designed according to module principle. In the heart of their design is lying module of jigging machines GRAVICON-4M.
Module is intended for washing sands of alluvial deposits and milled ores of non-ferrous metals of size up to 25 mm with possibility of mounting on dredges 250m3/h. Jigging machines in quantity of 11 pieces consisting of two modules were installed at the Navoi (Uzbekistan) mining and beneficiation plant, where they successfully operate at present.
|
Model |
JT-0.15 |
JT-0.57 |
JT-1 |
JT2-2 |
JT3-1 |
JT4-2 |
JT5-2 |
jigging
chamber |
Section
shape |
Trapezoidal |
Trapezoidal |
Trapezoidal |
Tectangular |
Trapezoidal |
Rectangular |
Trapezoidal |
Length
×
wider
(mm) |
200-400
× 500 |
450-750
× 950 |
450-900
× 1500 |
1070× 1070 |
960-2000
× 1950 |
1510× 1510 |
1200-2000
× 3150 |
Column
number |
single |
single |
single |
single |
single |
single |
single |
Chamber
number
(one) |
1 |
1 |
1 |
2 |
1 |
2 |
2 |
Single
area
(m 2 ) |
0.15 |
0.57 |
1 |
1.14 |
3.3 |
2.28 |
2.12
(single)
2.77
(double)
|
Aggregate
area
(m 2 ) |
0.15 |
0.57 |
1 |
2.28 |
3.3 |
4.56 |
5 |
Feeding
Particle
Size
(mm) |
5 |
6 |
5 |
< 10 |
< 20 |
< 8
or
< 60 |
< 8
or
< 60 |
Processing
capacity
(t/h) |
0.2-0.3 |
2-6 |
2-3 |
7.5-15 |
10-15 |
12-16 |
10-20 |
Water
consumption
(m 3 /h) |
1-2 |
1-2 |
1-2 |
1-2 |
1-2 |
1-2 |
1-2 |
Diaphragm |
Stroke
(mm) |
4.2-30
90-180 |
12\17\21 |
15\20\21 |
12\17\21 |
10-47
|
6.5-26 |
15\20\25 |
Freque-
ncy
(min -1 ) |
|
60-156
|
60-156
|
60-156
|
80-100 |
80-120 |
80-110 |
Motor |
model |
YCT112-4B |
YCT132-4B |
YCT160-4A |
YCT32-4 |
YCT-4B |
YCT160-4B |
YCT200-4A |
power
(kw) |
0.75 |
1.5 |
2.2 |
3 |
5.5 |
5.5
One
chamber
7.5
Two
chamber |
5.5
One
chamber
7.5
Two
chamber |
Dimensions
(mm) |
734× 960
× 1232 |
1530× 780
× 1550 |
2060× 1112
× 1890 |
2870× 1520
× 1880 |
2662× 2000
× 3030 |
4240× 1990
× 2750 |
3940× 2006
× 2580 |
|
Weight(kg) |
284 |
612 |
989 |
1637 |
3260 |
3500 |
3854 |
Jinshibao Corporation of manufacturing mining machines of Jiangxi Province, who is lying at foot of the beautiful Wu Yi Mountains and on the bank of abundant QinJiang River, was founded in 2001. Previously, it is called "mining machinery factory of ShiChen of Jiang Xi Province, "It covers more than 8000 square meters, and serve mining machines\developing mil running equipments, processing and selling as its main businesses.
Our corporation is holding on to the founding idea that credit stands first, living up to the service principle to satisfy the clients, and the managing idea that "Quality Stands first, Clients are the Gods". From 1995 on, all kinds of mining machines produced by our corporation recognized by the Supervising Bureau of Quality and Technique of Jiang Xi province recognized by the Supervising Bureau of Quality and Technique of Jiang Xi province continuously as "Qualified Products in the Province". Moreover, we are awarded as one of the famous enterprises in the Province and honorable titles of "making much of contract and keeping promises" "reliable quality" "excellent services after sale, " we also get government's-relevant departments' supports and prizes constantly. Our selling places cover all over the country, far more to South Korea\Vietnam\Burma\Russia and countries in Africa. And we are providing considerate services to thousands of clients and winning prestige in the world market.
Up to now, we have deeply realized it is the international standards the "Quality Managing System of ISO9002"follows to manage the enterprises orderly and effectively, to improve the quality, lower cost, perfect the guaranteeing system of quality, and then to advance the comprehensive quality of corporation, increase profits and the ability to compete. Our corporation will normalize our work according to the standards of "ISO9002"all the time, and try our best to put our managing idea of "quality stands first and clients are the Gods" into practice thoroughly, and requite the society and clients by using the best products. We are heartily welcoming new and regular clients to come here to give us some suggestions and trade.
