Product Specifications
Product Description
Process leachingThe manufacturing process of oil leaching in the workshop consists of leaching, removal solvent from the meal, distillation mixed oil, solvent condensation and exhaust purification. LeachingPre-press cake into the feed box temporarily saved to avoid solvent evaporation. The material in the leaching reactor rings circle from feed port to export, then is
spray reversed by mixing oil with concentration gradient. Mixed oil separation of impurities through a dedicated mixed oil filter. Extraction rate depends on the oilseed material, its temperature and humidity. Mixed oil processing is carried out in two stages: mixed oil cleaning; distillation of the solvent - mixed oil distillation. Raw material is continuously fed into the scraper conveyor. Mixed oil is carried into the mixing oil filling through the pump. Removal solvent from the mealMeal is carried from leaching reactor with rich solvent and moisture. The meal is transported to steam offline by scraper and conveyor and distilled in the evaporator. Steam from below into, solvent evaporation from above.
In the process of distillation solvent vapor condenses and remains in the meal, increasing the level of humidity. The
desolventized meal through the valve put into the dryer, after drying in case of cold air cooling. Distillation mixed oilBipolar distillation equipment has two sections with the primary distillation and ultimate distillation. Mixed oil starts the first distillation.
After the first distiller, gas solvent enters the horizontal capacitor through the separator. All processes again. Mixed oil is fed into the top of the stripper .At last c
rude oil into the hair tank out from the stripper. Solvent condensationThe solvent and water go into the sub-water tank. S
eparation water from the solvent must be with the help of the density difference. Non-aqueous solvent can be recycled. Free gas from the condenser is collected and enters the separator, then passes to the final condenser. Non-condensable gas is supplied to the exhaust gas purification system. Waste water from the separator is fed into the slurry stripper. After purification, the water enters the pool. Exhaust purificationNon-condensable gas enters the final condenser to recover the residual solvent. Thereafter, non-condensable gas is fed into a water absorber for solvent recovery. At the end of the exhaust gas is discharged through the flame arrester.
Changshu Tongda Company is the headquarter of Changshu Tongda Stainless Steel Machine of Foodstuff Corp. Ltd., the Research Institute of Chinese Changshu Meat Industrial Engineering Equipment, and Changshu Complete Sets of Slaughtering Equipment Corp. Ltd., Tongda Company is the only modernized company in China combining research institute, manufacturing factories and operational companies together, equipped with the advanced computer management system. With both strong technological and economic bases, Tongda has been one of the "Top-ten" in Chinese Meat processing machine industry. The quality of Tongda's products confirms to the National Food Health Law and the Exportation Commodity Inspection Standard, obtains the IS09001-2000 quality system authentication, and has for many times received the honors like Advanced Science and Technology Prize from ministry, province and city, and "Star of Quality" Golden Cup Prize in the International Food Exposition. The products have been sold over twenty provinces and cities in China, as well as to countries such as Japan, Sweden, Russia, Malaysia, etc.
For many years, our company has emphasized the technological development and horizontal cooperation, and has successively formed close cooperative relationships with China Domestic Trade Department; China Meat Products Research Center; China Livestock Product Processing Seminar; Jiangsu Meat Products Industrial Association; Relevant college institutions, and scientific designing organizations. We are closely following the development steps of world slaughtering and food processing machine industry. We have always been playing a leading role in China in terms of slaughtering research and development as well as separation of complete sets of equipment.
