Lead-Acid Battery Pulse Deep Charger
THE PROBLEM:
Batteries fail because the plates normally get covered with "sulfates". This coating gradually reduces a battery's ability to receive and deliver power. Eventually the battery suffocates (gets clogged) and must be replaced.
THE JEEGU ELECTRONIC SOLUTION:
The Pulse Deep Charger is a pulse charger and is Rejuvenator/Desulfator, too. Peak voltage and pulse charge battery, when charge battery and at same time rejuvenate the battery plate. At charge process the Deep Charger automatically dissolves the sulfates and prevents their return. Battery Additive dissolves the sulfates back into the battery acid. This cleans the plates, improves the battery's ability to provide heavy currents for starting, and extends the battery's life.
For dead battery, the Deep Charger can charge battery at 0 voltage, so many stock and dead battery will work again by this pulse charger work.
The Pulse Deep Charger had itself cycle charge process, that can let battery capacity increase after normal charge enough. For many sulfated battery, though this cycle process, that can let battery plate renew again.
BENEFITS:
Extends Battery Life
Increases Cranking Amperage
Charges Faster
Longer Discharge
Dissolves Sulfates
Prevents Sulfate Build-up
Reduces Evaporation
The Deep PULSE Charger is a Lead-Acid battery Rejuvenator/Desulfator device that removes capacity robbing sulfates from the battery plates while simultaneously returning the battery to operating voltage. During the rejuvenation process the Deep PULSE Charger automatically dissolves accumulated sulfates and prevents their return. This cleans the plates, improves the battery's capacity and ability to provide heavy currents for starting, or motive power thus extending the battery's operational life.
Many chargers will not function if the battery power is below a minimum voltage however the Deep PULSE Charger can charge a battery at low or even zero voltage. Therefore many batteries considered to be dead can be recovered by the Deep Pulse Charger.
SPECIFICATION:
ADPC-100-1201 ADPC-10K-1201
Input: AC 110-220V Input: AC 110-220V
Out put: Peak voltage 17.5V Out put: Peak voltage 17.5V
Charge amp: 1.2Amax (ampere A) 2Amax (ampere A)
ADPC-100-1201, 100Hz ADPC-10K-1201, 10, 000Hz
Reverse protection, short protection Reverse protection, short protection
Charge starting voltage: >=0V Charge starting voltage: >=0V
Charge finishing voltage: 14.4V Charge finishing voltage: 14.4V
NOTE: For 12V lead acid battery recovery. Any type. Any Capacity.
Battery MUST BE MECHANICALLY SOUND NO DEAD or FAILED CELLS
Shanghai jeegu electronic Ltd is an electronic design company. We focus the electronic PCB and products design in some new products wide. Lead acid battery desulfator is our products since 2004, now that including desulfator, AC pulse charger desulfator, and some machine for cycle battery and desulfate battery and calculate the battery capacity. And for more products like some solar charger including desulfate function big discharger etc. Many of products that using mcu or fpga that can intelligent control any function and display your needing like voltage amp and timer etc. Now the company develop some other products like mid etc. Welcome any company contact us, and hope we can establish good relation ship in future cooperation.
