Module: TL12GW-300C
Rated input power: 1.3kw/300mA (when stabilised after magnetron preheat)
Power limit: 1550W
Input AC voltage range and current: 205V-265V 6.0A
PF: 150mA-300mA >0.95 (over all>0.85)
Anode current rump-up time: 10s (hv power supply start up after 5s filament pre heat)
AC/DC conversion efficiency: >93%
Operating ambient temperature: -20C ~ +45C
Adjustable magnetron current range: 20mA -300mA
Magnetron current control method: Voltage mode: 0V-5.0V(analog control), currentmode: 0-20ma(analog control)
Anode current accuracy: <± 4% 24h AC205V-AC265V
Output HV: 3.8KV-4.6KV, 1)HV directly short circuit to ground allowed, shortcircuit time less than 1s. 2)HV continuous arc discharge allowed
Auxiliary power supply: External auxiliary power supply DC 14V/10W
And filament supply: External filament supply AC 3.3V/10A
Cooling: 1\PWM fan 80x80mm2\front panel in, end panel out
I/O interface: Standard 15pin interface
Input port 5 lines: 1\+DC14V/0.6A
2\GND
3\filament current detection>2.5V
4\DC12V 5mA power on signal 12V/5ma
5\0-5V magnetron anode current adjustment range 0-5V
Output port 5 lines: 1\ anode voltage 5V-2V
: 2\ anode current 0V-5V
: 3\ over voltage protection DC12V
: 4\ power supply fault DC12V
: 5\AC low voltage indication DC12V
Mounting type: 1, plug in design, hot plug in/out allowed(add/remove when power is on)
: 2, front panel two M4, distance 177mm, from left to right in the middle
3, end panel two locating pile, d=7mm, distance 140mm, length 20mm, from.
Left to right in the middle
Front panel led: 1, power on indication
2, hight voltage operation indication
3, cooling fan operation indication
End panel interface: 1, ac input (standard ac 3 terminal interface)
2, negative HV output (standerd ac interface)
3, signal I/O port, 15pin interface
4, GND connection screw
Grounding method: Shell earth + wire connection
Design life time: 30, 000h
Standby consumption: 1.5W
Testing load condition: Sumsung om75p
Overall size and weight: 220(L)× 160(W)× 90(h)mm/2600g
Quality assurance: One year warranty
LingZhi institute of high voltage power supply was founded in 1999. The institute has its original patent of LLC resonant converter, and devotes the mind to study and develop high frequency and high voltage switching power supply. The products of the company can reach the most advanced level in China even abroad. The products can have extensive use in many domains such as power system, broadcast television, railway, radar, welder, lighting, non destructive radial test, medical apparatus, sea water desalination, etc. The character of our technology: High reliability, low electromagnetic interference, high power density and high efficiency. This technology has been widely adopted by some world-class company such as: Vicor, Sony, Switchtech (New Zealand) and Sanken(Japan). The power module developed by LingZhi institute for magnetron has reached the top level in the high voltage power supply domain.
Our institute would like to offer our high qualified power supply to all the friends and to cooperate with you sincerely.
