Manual Cleaning Y Type Brush Water Filter

manual cleaning y type brush water filter


Introduction


automatic self-cleaning filter series that offers the most efficient solution to water filtering with varying dirt loads or fluctuating flow rates. The self-cleaning system draws the filter cake from the filter screen discharging the dirt without interrupting the filtration process. The entire filter surface is flushed within 20-30 seconds using minimum flushing water.
 
This unique design combines a suction scanner with Self Adjusting suction nozzles - to remove and discharge dirt from the filter surface - driven by an electric motor and an internal reversing direction screw which enables a continuous linear movement (back and forth) of the cleaning mechanism.
 

Feature:

Filter precision from 100um to 3500um,big filter area,high sewage carrying capacity,customized product.
Simple turn-of-a-handle cleaning of the filter screen,adjust the parameter of the automatic cleaning system.Automatic cleaning.
Has motor overload protection, which can effectively protect the motor.
Eliminates the need for turning off the water and extracting the filter screen for rinsing.No interruption of the process water flow during cleaning,Low pressure loss:less than 1%.
Easy to maintenance,installation and disassemble.
Flange connections to the user's pipeline, national standard flange, versatility.



Structure and principle

The inside structure of the automatic self-cleaning brush filter is made up of the stainless steel strainer and stainless steel wire brush and transmission part. The washing and the drainage are automatically finished by the drive motor and electrical valve. The operation way is automatic running (manual running is also Ok), It is with the double function of the pressure difference and regularly automatic drainage. The automation part takes use of the most advanced and reliable PLC in the world.

When the water flow gets through the filter, the impurity in the water is held by the strainer With the increase of the impurity accumulated on the surface of the strainer, the pressure difference reaches 0.04Mpa. The switch of the pressure difference will give out a signal while the PLC sends an instruction to start the drive motor and open the drainage valve; The impurity accumulated on the strainer will be brushed off with the rotating brush and discharged from the drainage exit. The whole process of brushing and draining require no personal operation and without machine halt. At the same time, the equipment is with the function of regular washing and draining and manual washing and draining to make sure that the water output is safe and reliable in any case.







Applications:
 
Process water
Cooling water processes
Industrial wastewater
Recirculation systems
Irrigation systems
Pre-filtration of disinfection equipment

 full automatic brush filter


Specifications:

Model	Inlet and outlet parameter		L1	Φ	L	D	Output power(w)	Motor     Kw/r/min	Weight Kg
	mm	in
YL-2Y	50	2	300	159	600	25	19	0.18/1400	80
YL-2.5Y	65	2.5	300	159	600	25	28	0.18/1400	100
YL-3Y	80	3	300	219	600	25	50	0.18/1400	130
YL-4Y	100	4	300	219	700	25	80	0.18/1400	170
YL-5Y	125	5	350	219	750	40	125	0.18/1400	200
YL-6Y	150	6	350	273	900	40	180	0.18/1400	270
YL-8Y	200	8	525	325	950	40	320	0.18/1400	350
YL-10Y	250	10	650	377	1140	40	490	0.18/1400	390
YL-12Y	300	12	680	425	1190	40	710	0.18/1400	480
YL-14Y	350	14	740	478	1290	40	970	0.18/1400	550