Categories
| Supplier: | Hangzhou Kulon Electronics Co., Ltd. |
|---|---|
| Price: | Negotiable/Piece |
| Min Order: | 1/Piece |
| Quantity:: | |
| Trade Terms: | FOB,CFR,CIF |
|
|
| Prod Model: | NES-25-12 |
|---|---|
| Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| DC Voltage: | 12V |
| Output Current Range: | 0~2.1A |
| Output Frequency: | 47~63Hz |
| Efficiency: | 83% |
| Input Voltage: | Full Range |
| Protections: | Short Circuit/ Overload/ Over Voltage |
| Working Temp: | -20 ~ +60 C |
| Dimension: | 99*82*35mm(L*W*H) |
| Package: | 0.3kg; 45PCS / 14.5kg / 0.66cuft |
| Output Type: | Single |
| Warranty: | 2 Years |
| Connection Mode: | Series Switching Power Supply |
| Starting Mode: | Self-excited Switching Power Supply |
| Voltage Regulating Mode: | Frequency Modulation Type |
| Certification: | EMC |
| Output Power: | 25W |
MODEL | NES-25-12 | |
OUTPUT | DCVOLTAGE | 12V |
RATEDCURRENT | 2.1A | |
CURRENTRANGE | 0 ~ 2.1A | |
RATEDPOWER | 25 W | |
RIPPLE & NOISE (max.) Note.2 | 120MVP-P | |
VOLTAGEADJ.RANGE | 10.8~13.2V | |
VOLTAGE TOLERANCE Note.3 | ±1.0% | |
LINEREGULATION Note4 | ±0.5% | |
LOADREGULATION Note5 | ±0.5% | |
SETUP.RISEHOLD.TIME | 500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load | |
HOLD TIME(TYP.) | 50ms/230VAC 10ms/115VAC at full load | |
INPUT | VOLTAGERANGE Note.6 | 85~264VAC 120~370VDC |
FREQUENCYRANGE | 47~63HZ | |
EFFICIENCY (Typ.) | 83% | |
AC CURRENT (Typ.) | 0.55A/115VAC 0.35A/230VAC | |
INRUSH CURRENT (Typ.) | COLD START 45A | |
LEAKAGECURRENT | <2mA/240VAC | |
PROTECTION | OVERLOAD | 110~ 150% rated output power |
Protection type : Constant current limiting, recovers automatically after fault condition is removed | ||
OVER VOLTAGE | 13.8~16.2V | |
Protection type:Shut down o/p voltage, re-power on to recover | ||
ENVIRONMENT | WORKING TEMP | -20~+60 (refer to derating curve) |
WORKINGHUMIDITY | 20~90% RH non-condensing | |
STORAGE TEMP HUMIDITY | -40~+85 10~95%RH | |
TEMPCOEFFICIENT | ±0.03%(0~45C) | |
VIBRATION | 10~500HZ,2G10min/1cycle,60 min each alongX,Y,Zaxes | |
SAFETY&EMC | SAFETY STANDARDS | UL60950-1, CB(IEC60950-1) approved |
WITHSTAND VOLTAGE | 1/P-0/P:3KVAC 1/P-FG:1.5KVAC 0/P-FG:0.5KVAC | |
ISOLATIONRESISTANCE | 1/P-0/P,1/P-FG,0/P-FG:100M Ohms/500VDC | |
EMI CONDUCTICN& RADIATION | Compliance to EN55022(CISPR22)classB | |
HARMONICCURRENT | Compliance to EN61000-3-2,-3 | |
EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204,EN550204,EN61000-6-1, Light industry level criteriaA | |
QTHERS | MTBF | 411.47Khrs min MIL-HDBK-217F(25) |
DIMENSION | 99*82*35mm(L*W*H) | |
PACKING | 0.3Kg 45pcs / 14.5Kg / 0.66CUFT | |
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4.Line regulation is measured from low line at rated lioad 5. Load regulation is measured from 0% to 100% rated load. 6.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | |
| Model | Output | Tolerance Voltage | Ripple and Noise | Efficiency |
| NES-25-5 | 5V, 0-5.0A | ± 2% | 80mvp-p | 78% |
| NES-25-12 | 12V, 0-2.1A | ± 1% | 120mvp-p | 83% |
| NES-25-15 | 15V, 0-1.7A | ± 1% | 150mvp-p | 84% |
| NES-25-24 | 24V, 0-1.1A | ± 1% | 200mvp-p | 86% |
| NES-25-48 | 48V, 0-0.57A | ± 1% | 240mvp-p | 86% |



Manufacturers Directory | Hot Products | China Products | Companies List| Resources Directory | News | Sitemap | Disclaimer | About Us | Contact Us | Cautop|
Copyright 2003-2024 China Manufacturer Directory.