Categories
| Supplier: | Prosper Lighting Institute |
|---|---|
| Price: | Negotiable/Piece |
| Min Order: | 5/Piece |
| Quantity:: | |
| Trade Terms: | FOB |
|
|
| Prod Model: | 12GW |
|---|
| Model number | 12GW |
| Rated input power | 1.3kw/300mA(when stabilised after magnetron preheat) |
| power limit | 1550W |
| input AC voltage range and current | 205V-265V 6.5A |
| PF | 150mA-300mA > 0.95 (over all> 0.85) |
| anode current rump-up time | 10s (hvpower supply start up after 5s filament pre heat) |
| AC/DC conversion efficiency | > 93% |
| operating ambient temperature | -20C ~ +45C |
| adjustable magnetron current range | 20mA – 300mA |
| magnetron current control method |
voltage mode: 0V-5.0V(analog control) current mode: 0-20ma(analog control) |
| anode current accuracy | < ± 4% 24h AC200V-AC265V |
| output HV |
3.8KV-4.6KV HV short circuit or arc discharge allowed |
| auxiliary power supply and filament supply |
external auxiliary power supply DC 14V/10W external filament supply AC 3.3V/10A |
| cooling |
1\PWMfan 80x80mm 2\front panel in, end panel out |
| I/O interface | standard 15pin interface |
| input port 5 lines |
1. +DC14V/0.6A 2. GND 3. filament current detection> 2.5V 4. DC12V 5mA power on signal 12V/5ma 5.0-5V magnetron anode current adjustment range 0-5V |
| output port 5 lines |
1. anode voltage 5V-2V 2. anode current 0V-5V 3. over voltage protection DC12V 4. power supply fault DC12V 5. AC low voltage indication DC12V |
| mounting type |
1, plug in design, hot plug in/out allowed(add/remove when power is on) 2, front panel two M4, distance 177mm, from left to right in the middle 3, end panel two locating pile, d=7mm, distance 140mm, length 20mm, from left to right in the middle |
| front panel led |
1, power on indication 2, hightvoltage operation indication 3, cooling fan operation indication |
| end panel interface |
1, ac input (standard ac 3 terminal interface) 2, negative HV output (standerd ac interface) 3, signal I/O port, 15pin interface 4, GND connection screw |
| grounding method | shell earth + wire connection |
| design life time | 30, 000h |
| Standby consumption | 1.5W |
| testing load condition | sumsung om75p |
| overall size and weight | 220(L)× 160(W)× 90(h)mm/2600g |
| quality assurance | one year warranty |
Manufacturers Directory | Hot Products | China Products | Companies List| Resources Directory | News | Sitemap | Disclaimer | About Us | Contact Us | Cautop|
Copyright 2003-2024 China Manufacturer Directory.