Product Specifications
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Type: |
Power/Watter Meter |
| Display: |
LCD |
| Electric Equipment: |
Three-phase Four-wire |
| Installation: |
Direct Connected |
| Power Source: |
AC Meter |
| Theory: |
Electronic Meter |
| Usage: |
Multi-rate Watt-hour Meters |
Product Description
MSM041CM THREE PHASE FOUR WIRE ELECTRONIC MULTI-RATE DIN-RAIL ACTIVE ENERGY METER
1) 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board installed (mounting holes center distance 63 mm), users can choose any one by themselves.
2) Ten pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
3) Have two tariffs, and port of set the tariff, input control voltage 0-90 Vac, set up tariff F1, input control voltage 150-400 Vac, set up tariff F2, the tariff conversion is controlled by timer outside or similar equipment.
4) Standard configuration type of cycle display, cycle display is 5 seconds. It can display 6 data at most. Can select the data which displayed. (Please specified when ordering). The decimal median which displayed can choose set one or two. (Default two decimal, please specified when ordering).
5) Use memory that is not loss easy, the data can be kept forever after blackout.
6) There are a polarity port of pulse output passive closed and a nonpolarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select), Complying with standard IEC 62053-31 and DIN 43864.
7) Eight LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, and the tariff state just now.
8) Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
9) Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect operation, we can also choose another type of wiring, and use CT (Product Configuration code is CO) and PT & CT (Product Configuration code is CQ) for operation.
10) Standard configuration extension terminals cover, in order to protect to use safety, may select short terminals cover. (Product Configuration code is CL).
|
Model |
Accuracy |
Reference
voltage (V) |
Current
specifications (A) |
Starting
current (A) |
Insulation
performance |
|
MSM041CM |
Class 1 |
3 x 127/220
3 x 230/400 |
5(30)
10(60)
20(100) |
0.02
0.04
0.08 |
AC voltage 4kV for 1 minute,
1.2/50us waveform
impulse voltage 6kV |
Morning Sun Electrical Co., Ltd. Founded in 1995, located in the Liushi Town - "Electric Capital", mainly producing Micro switch, Contactor, MCB, MCCB, Auto-Air-Conditioner Parts and Thermostats and related products, which have been sold to Europe, North America, South America, Middle East, Southeast Asia and so on. Based of the "Good quality, competitive price, timely shipment and nice service", now getting regular repeated orders and enjoying the good reputation among our customers.
"Morsun" is prepared and willing to cooperate with any friends from all over the customers for the mutual benefits and bright tomorrow!
