Multi-Media Machanical Water Filter for Ion Exchange Pretreatment

Carbon Steel With Rubber Lining Activated Carbon Water Filter Vessel



Overview
 
Multi-media filter using one or several filter media makes water of high turbidity flow through agranular ornon-agranular material of a certain thickness under a certain pressure, thereby effectively removing suspended impurities in the water and clarifying the water. The commonly used filter materials including quartz, anthracite and manganese sand, etc, are mainly used for turbidity removal of water treatment, water softening and pretreatment of pure water in preceding stages and outflow turbidity can be below 3 degrees. The filter is mainly used for reverse osmosis, electrodialysis, ion exchange as well as softening and demineralization system pretreatment and can also be used as coarse filtration of industry water supply with undemanding water quality, circulating cooling water, reuse water treatment of wastewater and recycled water, etc.


Categories:
1: Multi Media filter ,  
2: Active carbon filter,  
3: Quartz sand filter etc.
4. Easy to manage, low operating cost 
5. Filter media durable and recyclable 
6. Most practical, cheapest and basic filtration equipment 

Application
Mechanical Filter (Alao called pressure filter ), It's very important procedure in pure water pretreatment  and water purify system.
 
In water treatment field, filtration is a kind of water purifying process.Mostly filter medias are silica
sand (widely use),anthracite and so on. Filter medias include three type:granular, powdery and fibroid. Silica sand,anthracite, activated carbon, megnetite,ceramic, plastic ball, ect.
According to actual demands, some multi media filter (filter bed) will use two kinds of media layers. In industrial water recycling system, can effectively remove impurity,absorb oil ect, at last to reach 
water recycling standard. Mainly functions are remove suspended or colloidal impurity, especially 
effectively remove small particle and bacterium, also can remove BODs and COD in certain level.
 
Filter:

When the system is in a filtered State, the water flow through the water distributor which was unallowed,comply with shell,the water flow through the filter layer at the horizontal - flow state,as the water flowthe filter material layer, impurities are trapped within the filter layer,The filtered water is collected and evenly through water outflow,flowing parallel,at the high speed ,the filter could work well,and it can reach better effect too.
 
Backwash
 
With the continued accumulation of impurities in filter material layers, increasing loss of head,as the loss of head reaches a certain set limit, system will automatically be converted to the anti - washing, cleaning accumulation of impurities,
Backwashing happens at the differential pressure reaches 0. 05-0. 07Mpa,each time.and while the backwashing is over the differential pressure will back to 0.02-0.03Mpa.

TPYE	TANK SIZE (mm)	TOTAL HIGH (mm)	FLOW RATE (m3/hr)	INLET AND OUTLET (mm)
YLD-MF-500	500*1500	2350	2	DN32
YLD-MF- 600	600*1500	2380	2-3	DN32
YLD-MF- 700	700*1500	2400	4	DN40
YLD-MF- 800	800*1500	2400	5	DN40
YLD-MF- 900	900*1500	2500	6	DN50
YLD-MF- 1000	1000*1500	2600	8	DN50
YLD-MF- 1200	1200*1500	2700	11	DN65
YLD-MF- 1400	1400*1500	2800	15	DN65
YLD-MF- 1500	1500*1500	2850	18	DN65
YLD-MF- 1600	1600*1500	2900	20	DN80
YLD-MF- 1800	1800*1500 1800*1800	3000	25	DN80
YLD-MF- 2000	2000*1500	3100	30	DN100
YLD-MF- 2200	2200*1500	3180	38	DN100
YLD-MF- 2400	2400*1500	3330	45	DN100
YLD-MF- 2500	2500*1500	3380	50	DN100
YLD-MF- 2600	2600*1500	3430	55	DN125
YLD-MF- 2800	2800*1500	3530	60	DN125
YLD-MF- 3000	3000*1500	3630	70-80	DN125
YLD-MF- 3200	3200*1500	3730	80~100	DN150

 

 
FAQ:
01. What is your raw water?
02. What is the flow rate per hour?
03. What is the power supply in your country?
04. What is the working pressure?
05. Do you need automatic or manual control system for this carbon filter?