Energetic Industry Co., Ltd. >> Natural Peek Ca30 Rod, Virgin Material

Natural Peek Ca30 Rod, Virgin Material

Name: Natural Peek Ca30 Rod, Virgin Material
Brand: China-Manufacturer-Directory.com
SKU: 745654515
Availability: InStock
Rating: 4.7 (70 reviews)

Supplier:	Energetic Industry Co., Ltd.
Price:	US $ 150KG
Min Order:	1KG
Quantity::
Trade Terms:	FOB,CFR,CIF

Product Specifications

Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Length:	1000mm or Customized
Color:	Natural, Black, Red, Green
Diameter:	20-220mm
Type:	Peek+Glass Fiber, Carbon Fiber, Medical
Material:	Peek

Product Description

PEEK product group: 1. PEEK+Glass fiber 2. PEEK+Carbon fiber 3. Medical grade PEEK 4. Food grade PEEK PEEK are available: rod, sheet, tube, strip, part Quick Detail: Temperature 250°C resistance Carbon fiber filled PEEK rod Wide thickness range available: 6mm ~ 50mm SGS RoHS approved Description: Trade names: Polyether etherketone, Carbon fiber filled PEEK rod Available Shapes: Sheets, Rods, Tubes,Plates Color: Natural Rods Diameter: 6.0mm ~ 150mm Length: 500mm ~ 1000mm About PEEK Rod & Sheet: PEEK is a high performance engineering thermoplastic that offers chemical and water resistance similar to PPS, but can operate at higher temperatures. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoropolymers. PEEK carries a V-0 flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame. Advantages: Excellent chemical resistance Very low moisture absorption Inherently good wear and abrasion resistance Unaffected by continuous exposure to hot water or steam High temperature resistant, can withstand 250°C Key Features: Strong and stiff plastic Outstanding chemical resistance Good mechanical properties at elevated temperatures Resistant to hot water and steam Bearing grade PEEK has excellent wear characteristics UL 94 V-0 flammability rating (0.059" thickness) Very low smoke and toxic gas emissions when exposed to flame Applications: Semiconductor machinery components Aerospace parts Seals Pump and valve components Bearings and bushings (bearing grade PEEK) Electrical components Medical instrument parts Food processing machinery components Note: Usually, the color and length can be customized, width will according to the available extrusion mould or molding mould. Tolerance for length, width, diameter and thickness may vary when manufacturing. More information, please feel free to contact us online or by email.

PEEK Technical Data Sheet
Technical Data	Method of Verification	Unit	PEEK
I.Physical Properties
Density	ISO 1183	g/cm3	1.31
Water absorption	ISO 62	%	0.06

II.Mechanical Properties
Tensile strength at yield	ISO 527-2	MPa	97
Tensile strength (psi)	527	MPa	110/-
Tensile Modulus (psi)	527	MPA	4400
Flexural strength (psi)	527	MPa	110/-
Compressive strength (psi)	604	MPA	29/57
Coefficient oflinear expansion(23-100°C)		m/(m.k)	50×10-6
Thermal conductivity	C177	Btu-in/hr-ft2-°F	1.7
Tensile strength at break	ISO 527-2	Mpa	-
Elongation at break	ISO 527-2	%	25
Modulus of elasticity after tensile test	ISO 527-2	MPa	-
Modulus of elasticity after flexural test	ISO 178	MPa	4,200
Hardness-Rockwell	ISO 2039-2		-
Hardness - Shore D	DIN 53505		88
Charpy impact strength at 23 C	ISO 179	kJ/m2	N.B.
Friction coefficient	DIN 53375		0.34

III.Thermal Properties
Heat deflection temperature - HDT/A	ISO 75-2	C	152
Max. service temperature - Short term		C	300
Max. service temperature - Long term		C	260
Thermal conductivity at 23 C	DIN 11359	W/(K*m)	0.25
Coefficient of linear thermal expansion	ISO 11359	10 -4* K -1	0.47

IV.Electrical Properties
Dielectric constant at 1 MHz	IEC 60250	10 6 Hz	3.20
Dielectric loss factor at 1 MHz	IEC 60250	10 6 Hz	0.003
Volume resistively	IEC 60093	Ohm (Ω) * cm	≥10 16
Surface resisively	IEC 60093	Ohm (Ω)	≥10 15
Dielectric strength	IEC 60243-1	kV/mm	19

V.Miscellaneous Data
Flammability	UL 94	Class	V-0

NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m

Statement:
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. ENERGETIC will not provide any legally binding guarantee of certain properties, or any suitability.

Established in 2011 as a dedicated supplier of Engineering Plastics, Energetic is recognised as a leading supplier in the Chinese market, with a focus on Engineering and Industrial materials. Energetic has developed a reputation for service, quality and the ability to advise our customers on "right material with high cost-performance from China". Based on our own plant of POM extrusion, meanwhile the support of our professional manufacturers, Energetic brings to the worldwide market high quality rods, sheets, tubes and other specialty state-of-the-art plastic materials, which include

- Gerneral Plastic: HDPE sheets, HDPE rods, PP sheets, PP Rods, PVC sheets, PVC rods, ABS sheets, ABS rods, HIPS sheets, HIPS rods

- Engineering Plastic: POM sheets, POM rods, PTFE sheets, PTFE Rods, PA6 sheets, PA6 rods, PC sheets, PC rods, UHMWPE sheets, UHMWPE rods, PVDF sheets, PVDF rods

- High Performance Plastic: PPS sheets, PPS Rods

- Insulation Materials: Phenolic Paper Sheets, 3025 Phenolic Cotton Sheet, 3240/FR4 Epoxy sheets & rods, alternative Durostone Sheet CAS761

Our major warehouse is located in the Shenzhen, a seaside city, with a unequalled geographic advantage and mature logistic convenience, we are able to send these heavy cargos to our global clients by sea. We also support a network of distributors strategically located to service those needs of regional areas throughout all over the world.

With many years of experience in the plastics and engineering field, our able and dedicated staff member are qualified to solve your industry problems, answer your questions and satisfy your material needs.