| Oil resistant stone glue epoxy adhesive for metal |
|
|
|
|
|
1. Hight quality
2. Superior bond strength
3. Easy to use
4. Quick dry
What to bond:
High performance epoxy adhesive is the adhesive for households and industries. Suitable for repairs and welds. Makes superior bond strength. Bonds to all metal, plastic, rubber, wood, ceramic, glass and concrete. Resistant to acid, alkali, oil, solvent and chemicals. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filled, grinded and drilled.
Application:
1.Surface to be repaired should be clean, dry and free of oil.
2.Pierce ends of tubes using cap. Squeeze equal amount of hardener and resin from each tube and mix thoroughly until a uniform color is achieved. Mix only what you can use immediately.
3.Apply to surface to be repaired. Remove excess epoxy.
4.Sets in 3-5 minutes.
Directions:
1.Adequate local exhaust ventilation is required and the product must be kept off children.
2.Wear leather glove while operating. In the event of its touch of skin or eyes, flush with fresh water or see a physician.
3.Store in dry, shaded, and ventilated condition away from the sources of heat and ignition.
4.In the event of mass use, make a pre-test to avoid the negative effect of mass operation.
Storage and packing:
1.Store on shady and cool place. The shelf life is one year. It is available to reuse based on passing of the test if being beyond the shelf life.
2.Preserve and transport as non-dangerous product.
Execution criterion: JC887-2001
Guarantee period: 12 months
Gross weight: 56.7g/set
Storage and Packing:
Keetp it in cool, dry place.
Cautions:
1. Mix thoroughly; Apply to at once after mixing, less amount every time.
2. Cover tightly after using, do not confuse the caps.
3. Wash off the additional glue by alcohol before its solidifying.
4. Avoid eyes and skin contact.
5. Keep out of reach of children, guard against to enter into mouth.
| items | Part A | Part B |
| Appearance | Clear Transparent liquid | Clear Transparent liquid |
| Viscosity(25°c) | 10000-20000 CPS | 10000-20000 CPS |
| Mix Ratio | A : B= 1 : 1 ( weight ) |
| Curing Time ( 25 °C) | 3~5 min (10g mixture of A and B) |
| Shear Strength(3h) | ≥10MPa |
| ShearStrength(24h) | ≥18MPa |
| Shelf Life | more than 12 months |
Thank you for visiting. Any questions, please feel free to contact us. I am Ruiqiang Wu here.
Kater Adhesives Industrial Co., Ltd is a group company which has been engaged in the development, production and sale of silicone sealant, acrylic sealant, gasket maker, polyurethane sealant and etc.
Kater Silicones is one of the largest Silicone Sealant factories in China (USD 38 million sales turnover per annum with over 680 employees) located in Foshan and Yantai. Currently, we have close to 25% market share in China with a planned output of 40.000 tons of silicone sealants this year (2011). We do offer all sorts of Silicone sealant products (one part and two part sealants in Cartridge, Foil, Tube or Drum for refillers all over the world. )
Kater Acrylic Sealant was elected as "Satisfied Products of China Consumers", "Qualified Products of Shandong Technology Supervision Bureau", and "Gold Award of 98 Patent Market & New Technology Expo". We are Member Certificate of China Adhesive Agent Industrial Association in 2000, and our acrylic sealants are Quality Checking Exemption Products in China.
Kater Polyurethane Sealant has been engaged in development, production and sales of Polyurethane sealant, and we passed the "ISO/TS16949: 2002". Our company owns two fully automatic sealant production lines which were imported from Germany and Italy with an annual production capacity over 18000 tons. Additionally, we have established a top-ranking Laboratory and Provincial-Level Enterprise Technology Center, and also have a highly qualified professional team consisting of professors, middle aged and young specialists, possessing strong product development, innovation and marketing service capability.
Kater are producing materials for normal weather sealing and structural glazing application according to the DIN ISO 9001norming. Our Sealants do meet ISO9001 Standard, British Standard, American Standard and China Standard. We are doing many private label products for big multi-national companies and factories.
KINGFIX car refinish product has become the world leader in automotive coating industry. The KINGFIX and MINGQU Are two brand of low temperature baking series and furniture series. The Specialized technical service person, simplify the process for you.
1. Complete product range:
A. Car Paint: Epoxy Primer, Polyester Putty, MS Filling Primer, Base Coat,
Clear Coat, Thinner, Hardener
B. Wood Paint: NC/PU/PE Paint
2. Car Paint Color covers all products international color trends, metal,
Pearl paints series of guided fashion.
We aim to expanding brand and quality to over the quality.
Welcome you to choose KINGFIX Auto Refinish to raise your profit.
Welcome to visit our adhesive office website: http://www.kater-silicones.com/
Paint office website: http://www.kingfixpaint.com/
