Pharmaceutical Vacuum Freeze Drying Machine Lyophilization Machine
| Price: |
US $ 300000/Set |
| Trade Terms: |
FOB,CIF,EXW |
| Min Order: |
1/Set |
| Pay Type: |
L/C,T/T |
Product Description
Industrial rotary dryer is mainly applied for stoving slag, sand, coal, fly ash, iron powder, ore, quartz sand and other particle materials. It has the following characteristics:
1. The cylinder protect itself, thermal efficiency can up to 95%. The whole length of
the dryer reduced to 50% approximately than mono cylinder and reduced land
investment to 50% approximately
2. Cylinder adopts heat-resistant and wear-resistant steel plate welding with long service life and easy maintenance...High thermal efficiency, temperature of outer cylinder is 60or below(temperature of outer mono-cylinder is high to 150°C)
3. Low temperature of outlet, long-service of dust removal machine. It also can be directly connected to air box pulse bag filter.
4. Without gear and pinion drive, but wheel rotation applied, level operation of the complete machine makes system simple and reasonable.
5. Air heater could match boiling furnace, or oil furnace can also be applied, which can dry materials with size below 20mm.
6. Final moisture index can be adjusted according to requirements of customers.
1.Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls.
2.This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow).
3.The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer.Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated.
4.When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Technical Parameter and Specification| Model | Φ2.1X4.5M | Φ2.5X6M | Φ3.2X7M | Φ3.6X8M |
| External Diameter(M) | 2.1 | 2.5 | 3.2 | 3.6 |
| External Length(M) | 4.5 | 6 | 7 | 8 |
| Volume( m³) | 18.84 | 31.89 | 56.26 | 86.3 |
| Revolving Speed(RPM) | 7.5 | 7 | 5.5 | 5 |
| Slag Original Moisture% | 12 | 1 | 12 | 12 |
| Slag Final Moisture% | 1 |
| 1 | 1 |
| Sand Original Moisture% | 8-10 | 8-10 | 8-10 | 8-10 |
| Sand Final Moisture% | 0.5-1 | 0.5-1 | 0.5-1 | 0.5-1 |
| The Highest Temperature(ºC) | 700-750ºC | 700-750ºC | 700-750ºC | 700-750ºC |
Picture 
Features:
1. Lower investment,about one-sixth of the same device imported abroad.
2. Excellent drying performance, first choice for the drying of mortar and slag.
3.Perfect Self insulation thermal efficiency (up 80% ), dramaticlly improve the thermal efficiency to more than 45%
4.Adapt to extensive fuel,such as coal, oil ,gas.
5.Less field occupation,lower construction cost and low power consumption
6.Adopt alloy-steel plate,wear-resisting and durable
7.The final moisture index can be easily adjusted according to customers' requirements.
8. Lower gas outlet temperature,long operating life with dust-cleaning apparatus.
9.Adopt riding wheel transmission
10.Lower discharging temperature ,suit for continuous production and package
Company Information
Certificate
FAQ: We'd like to recommend a suitable type rotary drum dryer for you and send you reasonable quotation, please give us some more information about your requirement as follows:
1. What is the raw material to be dried?
2. What is the original moisture before drying and your required moisture after drying?
3. What is required capacity(t/h)?
If you are interested in our small manufacturing rotary dryer plant/ rotary drum dryer from China, please feel free to contact with us at any time
| Prod Model: |
A001 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Power(W): |
3000-75000 |
| Warranty: |
One Year |
| Drying Material: |
Sand, Cement, Iron, Slag, Clay, Coal Mixture Powde |
| Spare Parts: |
Supply for Whole Life with Good Price |
| Energy: |
Coal, Gas, Oil |
| Installation: |
Offer |
| Voltage: |
380-450V |
| Type: |
Rotary Drying Equipment |
| Length: |
3-20m |
| Weight: |
10-40t |
| Structure: |
Rotary Type Drier |
| Operational Method: |
Continuous |
| Operation Pressure: |
Atmospheric Dryer |
| Heating Mode: |
Transmission |
| Movement Way: |
Combined |
1. About Us
Linyi Jinyong Kiln Machinery Manufacture Co., Ltd( Linyi East Kiln Reasearch Institution ) is a large -scale kiln enterprise integrating desgin, manufacturing, installation, commissioning and service aintergration. Major furnace design, construction, technology transfer, etc. Our company is syndic unit of China Lime Association Council Uuit, Shandong environmental protection product accreditation unit.
2. Company Philosophy
Our company supplies different kinds of products. High quality and favorable price. We're pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
3. Our product
As the largest mine machinery manufacturing enterprise, we provide environment-friendly lime kiln, including vertical shaft lime kiln and rotary lime kiln. We also provide other kiln equipment part: Centrifugal fan, fan parts, jaw crusher, hammer crusher, impact crusher etc, These products have received ISO9001: 2000 certification and SGS certification, and are popular in Vietnam, Bengal, Philippines, Malaysia, Iran, India, etc.
4. Technical Support
Through many years' practical experiences and continuous technology innovatin, our company's lime kiln enjoy high popularity all over the China. We now have about 300 skilled workers, 12 of construction team, has serveral senior professional and technical engineer. The projects are spread all over the country and all over the world.
5. Certificate
In 2013, the company was awarded Shandong Province Kiln Engineering Construction Secondary Qualification. Our company have engaged in research and development of design and construction of kiln furnace for decades, have rich experience. On the promise of national initiatives in environmental protection, Our company design energy-saving, environmental, high capacity lime kiln production line, achieve the goal of ventilation and dust removel in technology field.
6. Service
Pre-sale services: Enthusiasm We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
Sale services: Servant Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
After-sale services: Faithfulness To establish long term friendship, we will regularly pay return visit to customers.
