Product Specifications
| Prod Model: |
SC 63X150 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Cylinder Bore From 32~400mm: |
Cylinder Stroke From 25~1000mm |
| Structure: |
Piston Cylinder |
| Power: |
Pneumatic |
| Standard: |
Standard |
| Pressure Direction: |
Double-acting Cylinder |
| Material: |
Aluminum Alloy |
Product Description
SC Pneumatic Cylinder
Installing and useThe load would be changed during working, so, the cylinder with enough output force issuggested, in the case of high temperature, operator is suggested to choose correspondingwithstand high-temp cylinder.
Before piping of cylinder, the sundries inside pipe must be cleaned, in order to preventsundries from entering into cylinder.
The medium used by cylinder can not be put into use until it has pass filtering by certainfiltering element above 40 μm.
Under condition of low temperature, the anti-freezing measure must be adopted, so as toavoid water freezing of system engineering.
The idling test run should be done before operating of cylinder, the buffer must be adjustedto be minimum before run, then increased gradually, so as to avoid producing super-largeshock damaging cylinder.
The cylinder should avoid side-load as for as possible during working, in order to maintainnormal work endurance of cylinder.
Provided cylinder has been out of work for long time dismantled, operator should take noticeof surface rustproof, the dustproof cap is suggested to be added at air admission/exhaustorifice.
Cylinder Bore ID (mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 | 250 | 320 | 400 |
| Acting Type | Double Acting |
| Working Medium | Air |
| Mounting Type | Basic type, LB, FA, FB, CA,CB, TC, TC-M |
| Operating Pressure Range | 0.1 to 1.0 Mpa |
| Test Pressure | 1.35Mpa |
| Operating Ambient Temperature ) | -5 to 70 |
| Speed Range | 30 to 800 mm/s | 20 to 300 mm/s |
| Buffer Type | Adjustable Cushion |
| Cushion Stroke | 24 | 32 |
| Joint Size | G1/8 | G1/4 | G3/8 | G1/2 | G3/4 | G1 |
Wuxi Leierda Pneumatic Technologe Co., Ltd located in Furong 2ND Rd., Xishan Economic Development Zone, which is the state-level of economic development zone inWuxiCity, Jiangsu Province, and which is also the center of the Yangtze River Delta Development Zone, so the traffic is very coveninent.
CHLED pays attention to the development of science and technologe and regards it as the first productivity, and has got the certificate of ISO9001 quality control sysetm, and has passed Euro CE safety certificated. For ensuring the products quality&performance, to create the professional brand of the pneumatic, CHLED equiped with the advanced manufacturing and testing machines. Suas as automatic CNC, machine tool, milling, grinding, horizontal boring&milling machine center etc. CHLED pays attention to the development of science and technologe and regards it as the first productivity, and has got the certificate of ISO9001 quality control sysetm, and has passed Euro CE safety certificated, and the annual output reaches 2 millions of pneumatic cylinder and 200 thousands of hydraulic cylinder, and the products not only popular in domestic market but also well accepetd in foreign maket.
CHLED always has been to "concentrate, professional and cylinder manufacture" for the principle of the enterprise. In the economic globalization today, facing opportunities and challenges, CHLED keep "Think of the source of getting rich, make progress after becoming affluent. " CHLED Corporation is willing to create the wealthy and the bright future with all customers, making the new contribution for the development of pneumatic hydrauluc industry.
