Poly (Butylene Adipate Terephthalate) Pbat Resin

Product Specifications

Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Characteristic:	Thermoplastic Resin
Color:	White
Synthetic Resin:	Polyester
Natural Resin:	Polyester
Molecular Principal Chain:	Polyester

Product Description

Technical data sheet(TDS)
 

Items	Bioaim® 2001
Relative Density	1.26
Melt Point,ºC	110-120
Melt-Flow-Index (190oC, 2.16 kg) ,g/10min	≤5
Tensile Strength,MPa	≥15
Elongation at Break,%	≥500
Flexual Modulus,MPa	≥80
Notched Impact Strength,KJ/m2	NB
Vicat soften point,oC	≥80
Hardness, Shore D	≥40
Ash,%	≤0.1

Material Safety Data Sheet
1.   Company identification
Company: ZIBO AIMGO PLASTICS & CHEMICALS CO., LTD.
Address: Room 1311, Bonded Logistics Center, High-Tech Zone, Zibo, Shandong, China.
Tel: +86-533-7995800            Fax: +86-533-7995800
2.   Substance identification
Type: Aliphatic-Aromatic Co-polyester
Code: Bioaim® 2001
Name: Poly(Butylene Adipate Terephthalate)           
Synonym:    PBAT
Application: Film
Formula:
CAS No: 55231-08-8
3.   Hazard identification
Contact with molten product may cause thermal burns.
Not cause eye, skin and respiratory contact irritation.
No data available concerning sensitizing effects, repeated dose toxicity and terrestrial toxicity.
4.   First-aid measures
If inhaled: Remove the affected individual into fresh air and keep the person calm. If difficulties occur, seek medical attention.
If on skin: Areas affected by molten material should be quickly placed under cold running water. Burns caused by molten material require hospital treatment. Seek medical assistance for removal of adhering material.
If in eyes: In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. If irritation develops, seek medical attention.
If swallowed: No hazards anticipated. Rinse mouth and then drink plenty of water. If difficulties occur, seek medical attention.
5.   Fire-fighting measures
Flash point: > 550 °F, Auto ignition: 470 °C
Suitable extinguishing media: water, foam, dry extinguishing media
Protective equipment for fire-fighting: self-contained breathing apparatus and turn-out gear.
6.   Accidental release measures
Avoid inhalation. Avoid contact with the skin, eyes and clothing. Sources of ignition should be kept well clear.
Avoid raising dust. Ensure adequate ventilation. After decontamination, spill area can be washed with water.
7.   Handling and storage
Keep container tightly closed and dry; store in a cool place. Avoid extreme heat. Avoid direct sunlight. Avoid all sources of ignition: heat, sparks, opening flame.
8.   Physical and chemical properties
Density (20°C):           1.26 g/cm3 
Melting range:            110 - 115 °C (DSC, 10 K/min)
Thermal decomposition:    350°C (TGA, 10 K/min)
Form: pellets
Odor: odorless
PH value: 7
Solubility in water: insoluble
9.   Stability and reactivity
Avoid extreme heat. Avoid all sources of ignition: heat, sparks, opening flame.
Substances to avoid: strong oxidizing agents, chlorinated hydrocarbons, aromatic solvents
Possible thermal decomposition products: gases/vapors, monomers, oxides, hydrocarbons
Corrosion to metals: No corrosive effect on metal.
10. Toxicological information
Non-toxic.
Based on our experience and the information available, no adverse health effects are expected if handled as recommended with suitable precautions for designated uses.
11. Ecological information
According EN 13432 or ASTM D6400, It is complete biodegradable material and can be composted and deposited in landfills. It can be recycled and incinerated in adequate plants. At the present state of knowledge, no negative ecological effects are expected.
12. Disposal considerations
Composting or incineration.
13. Regulatory information
Complies with TSCA.
14. Other information
Please call to (86)533-7995800 or visit our website: www.bioaimgo.com.
Important:
All information on this data sheet is based on the present state of our knowledge and does not guarantee of any kind of usage, application or purpose, whether implied or expressed since conditions of use are outside our control. It is provided for your guidance only. For your particular purpose, we recommend that you make tests to determine the suitability of a product prior to use. Each customer should establish his own rules and take proper steps appropriate to the circumstances within his control and must take responsibility for observing existing laws and regulations. This Data Sheet does not form part of the conditions of sale of our products and is of a general nature.
End of data sheet