Product Specifications
Prod Model: |
Fluorescent Transparent Red |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Powder Coating: |
Fluorescent Transparent Red |
Main Raw Material: |
Epoxy |
Color: |
White |
Method: |
Spray |
Certification: |
SGS |
Level: |
Finish Coat |
Substrate: |
Iron |
Expiration Date: |
1 Year |
Components: |
Resin,Pigment,Curing Agents and Additives |
Formation Mechanism: |
Spray and Bake |
Appearance: |
Carton Packaging |
Product Description
Art powder coating
General Introduction:
The art powder coating can be both used for indoor and outdoor. This product has a unique decorative effect luxurious appearance. It can help cover up the defects of the substrate.
You need to pay attention to two points. First, since the products contain metallic pigments, when using an electrostatic gun construction should ensure that the system is well grounded, while setting a lower amount of static voltage and flour, to prevent sparking phenomenon when spraying. Second, in order to improve the decorative and overcome the metal coating easy to clean off the paint, we recommend to use the transparent powder coatings to carry varnish.
Product seiers:
We provide sand grain, hammer, silk stripes, marbling, metal and other effects of the product appearance. And we can offer a variety of shiny products based on user demand.
Powder physical properties:
Proportion: 1.2-1.8 (depending on the color and gloss )
Particle size distribution: 100% less than 100 microns (depending on the
Specific indicators art effects ).
Liquidity: 120-140
Average coverage:
6-10m3/kg, the membrane is 60μ M(calculate by 100% utilization rate of powder coating).
Packing:
Carton packaging, lined with double polyethylene bag, net weight 20 kg.
Storage requirements:
Store below 30 ° C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited. Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.
Health and safety:
This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.
Coating performance |
Test items |
Inspection standards |
Test indicators |
Impact resistance |
ISO6272 |
GB/T1732-1993 |
30-50kg/cm |
Cupping test |
ISO1520 |
GB/T9753-1988 |
6mm |
The adhesion (grid method) |
ISO2409 |
GB/T9286-1998 |
0 |
Bending |
ISO1519 |
GB/T6742-1986 |
3mm |
Pencil Hardness |
ASTMD3363 |
GB/T6739-1996 |
1H-2H |
Salt spray test |
ISO7253 |
GB/T1771-1991 |
>500 hours |
Damp heat test |
ISO6270 |
GB/T1740-1979 |
>1000 hours |
|
Annotate: |
1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns. |
|
2.The above coating performance may be lower as shiny and slightly lower. |
Established in 1990, Yangzhou Senyida Coating Equipment Manufacturing Co., Ltd. is a manufacturer specialized in the research development and production of powder coating equipment and powder coating. We are located in Yangzhou, Jiangsu, China, with convenient transportation access. We are close to Yangzhou Taizhou Airport and Nanjing Lukou Interational Airport.
Our company mainly produce and manage electrostatic powder coating production line, powder impregnation equipment, through spray, leaching pretreatment devioc, cathodic and anodic electrophoretic coating equipment, water curtain spray booth, electrostatic spray chamber, hydraulic spinning type spray chamber, hot air drying furnace ( including electric heating type, fuel type, gas type and coal type ), automobile paint baking room, the PC control system, suspension conveyor, ventilation and dust removal equipment, powder manufacturing apparatus (offering formula ), the environmental protection type agentia of pretreatment, automatic reciprocating machine, clectrostatic spraying machine and so on. In addition, another important product of our company is the thermosetting powder coating (including epoxy polyester, pure polyester and so on ). We have sold to many countries and regions
All of our products comply with international quality standards. As a result of our high quality products and outstanding customer service, we have established the relationships with many well-known enterprises in the domestic. We have also gained a global sales network reaching Uzbekistan, India and so on.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us and welcome to guide. We are looking forward to forming successful business relationships with new clients around the world in the future.