Product Specifications
| Prod Model: |
HD-10B |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Product Description
This tester is a integrated tester for plug. It is used to test the breakover, insulation, high-volt, leakage current of power plug. It meets the requirements of many national and international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC, etc. It is a totally automatic testing machine make your operation more convenient and simple.
Features:
* All of the test subjects will done automatically.
* The inner/outer high-volt value and persistence time can be adjusted separately.
* Test speed is quickly, all test subjects will be achieved only in less than 2 seconds.
* The PLC control system is come from Mitsubishi, Made In Japan.
* The relay is come from Schneider, Made In French.
* If the sample is incompetent, there is a alarm by noise and alarm light.
* If the sample is incompetent, this machine will stop at once and show you which subject is incompetent.
After you push the emergency button it will restart to a new test. And a switch with key can be made to order to replace the high-volt starting button, it is very useful, because when a alarm happen, the operaters can not restart this machine, only when the managers have checked over and restart it by key the machine will be working again.
* When test over, the sample will be pushed out automatically, and a "T" or other characters will be marked on it(only English characters).
* For double-headed power plug. This makes your test more quick.
Technical parameter:
Polarity test: Test E, L, N wires in sequence.
Insulation test high-volt: DC 500V ± 10%.
Insulation resistance: 2, 7, 20, 50, 100MΩ (can be made to order).
Inner high-volt: 0~5KV ± 5% (adjustable).
Outer high-volt: 0~5KV ± 5% (adjustable).
Leakage current: 0.5, 1, 3, 5, 10mA(can be made to order).
Rated power: 500VA.
Cylinder power: Compressed air with 0.4 to 0.6Mpa.
Dimensions: 750mm W, 540mm D, 520mm H.
Power source: AC 220V± 10%, 50Hz.
Weight: 40 kg, approximate.
NOTICE:
1. Inner high-volt applies between L, N, E wires, and the outer high-volt applies between L, N, E wires and jacket.
2. Both 3-core and 2-core power plug can be tested by this machine.
|
Polarity test |
Test E, L, N wires in sequence |
|
Insulation test high-volt |
DC 500V +-10% |
|
Insulation resistance |
2, 7, 20.50, 100MΩ(can be made to order) |
|
Inner high-volt |
0~5KV +-5% (adjustable) |
|
Outer high-volt |
0~5KV +-5% (adjustable) |
|
Leakage current |
0.5, 1, 3, 5, 10mA(can be made to order) |
|
Rated power |
500VA |
|
Cylinder power |
compressed air with 0.4 to 0.6Mpa |
|
Dimensions |
750mmW, 540mm D, 520mm H |
|
Power source |
AC 220V +-10%, 50Hz |
|
Weight |
40 kg, approximate |
Hongdu testing equipment Co., Ltd established in 2000, we focuses on the provision of products and services to our clients through high quality and competitive price. We supply standard or customized solutions and products for many test, measurement and quality control tasks required in the world of cable, wire, socket, plug, switch, plastic and rubber testing. All of our products are complying with the requirements of many standards, such as UL, IEC, VDE, BS, CSA and so on. R&D center established with east China university of science and technology in 2006 makes us could provide more professional products and after service.
The key products from hongdu range include aging oven, cold chamber, constant temperature and humidity tester, glow wire apparatus, flame test chamber, tracking flame test chamber, spark tester, wire useful life tester, wire abrasion tester, flexing test apparatus, tumbling barrel apparatus, temperature rising tester, plug and socket tester, load machine, electronic tensile tester, power plug integrated tester and much more.
