Specifications
1. PTFE Mesh Conveyor Belt
2. Heat resistant, Microwave safe
3. High drying efficiency
4. Non-toxic & non-stick
5. Great tensile strength
PTFE Coated Fiberglass Mesh Conveyor Belt
PTFE Coated Fiberglass Mesh Conveyor Belt is ideally suited for conveying products within highly efficient air distribution systems allowing optimised moisture removal to take place and is commonly used within ultra violet and infra red dryer units
The open area allows maximum air flow optimising drying times whilst its extreme properties make it a natural choice for dryer manufactures.
Applications
PTFE Coated Fiberglass Mesh Conveyor Belts are used in applications such as the drying of printed products for example; Point of display stands, T-shirts, glass and mass produced paper prints. Print dryers usually opt for Ultra violet, Infra red or hot air as the heat source to dry.
Other applications range from the drying of cereals, non woven's, charcoal interlinings, carpet & carpet tiles, printed circuit boards and shrink-wrap tunnels but to name a few.
Features & Benefits
PTFE open mesh conveyor belting is light weight and cost effective therefore is easy to handle and less expensive than wire alternatives that can be difficult to replace. Often supplied with a metallic clipper type fastener these style of belts can easily be removed and replaced therefore minimising downtime and saving money. This material can be offered in carbon loaded black therefore providing antistatic properties.
Material Properties
· Temperature resistance: -70° C up to plus 260° C
· Chemical Inertness
· Ultraviolet, Infra-red, microwave, radio frequency resistance
· Non-Stick surface
· Lightweight and energy efficiency for economical operation
Additional Information
4x4 open area mesh is available in widths up to 4000mm wide and can be supplied at any length required. In addition film, glass or kevlar can be applied as edge reinforcement depending of the environment it will be used within. There are various methods of joining screen-printing belts however the metallic clipper or spiral types are more typical
|
Model |
Mesh Size |
Material |
Thickness |
Weight |
Temp Resistance |
Max Width |
Tensile Strength |
|
YS-6001 |
1x1mm |
fiberglass |
0.5mm |
370g/m² |
-70-320C |
4000mm |
310/290N/cm |
|
YS-6002 |
2x2mm |
fiberglass |
0.7mm |
450g/m² |
-70-320C |
4000mm |
350/310N/cm |
|
YS-6003 |
4x4mm |
fiberglass |
1.0mm |
400g/m² |
-70-320C |
4000mm |
390/320N/cm |
|
YS-6004 |
4x4mm |
fiberglass |
1.0mm |
450g/m² |
-70-320C |
4000mm |
390/320N/cm |
|
YS-6007 |
4x4mm |
fiberglass
+kevlar |
1.2mm |
600g/m² |
-70-320C |
4000mm |
895/370N/cm |
|
YS-6008 |
4x4mm |
fiberglass |
1.0mm |
500g/m² |
-70-320C |
4000mm |
395/370N/cm |
|
YS-6010 |
4x4mm |
Kevlar |
1.0mm |
500g/m² |
-70-320C |
4000mm |
900/600N/cm |
|
YS-6012 |
4x4mm |
fiberglass |
1.0mm |
550g/m² |
-70-320C |
4000mm |
395/370N/cm |
|
YS-6013 |
10x10mm |
fiberglass |
1.2mm |
450g/m² |
-70-320C |
4000mm |
360/300N/cm |
|
YS-6014 |
0.5x1mm |
fiberglass |
0.5mm |
420g/m² |
-70-320C |
4000mm |
310/290N/cm |
|
YS-6015 |
2x2.5mm |
fiberglass |
0.9mm |
600g/m² |
-70-320C |
3000mm |
390/320N/cm |
Taixing Youngsun FL-Plastics Co., Ltd. is a professional manufacturer and exporter of fluorescent lamp starters and PTFE thread seal tape. With over 10 years of manufacturing experience, all of our products are made in accordance with international quality standards. We export to clients throughout Europe, the Middle East, Africa, Southeast Asia, America, and Australia with annual sales volume reaching USD4, 000, 000.
We operate an 8, 000 square meter factory workshop equipped with advanced production and testing equipment sourced from Taiwan, Korea, and Italy. We also have our own printing factory and packing workshop, which enable us to carry out all design, production, and packing entirely in-house according to customer's specific requirements. Thus we are able to control our costs and pass our savings on to our customers.
For many years, our company has been paying close attention to scientific management and we are always ready to provide first-class efficient service for our customers. To better meet the needs of customers, we have established Taixing Youngsun International Trading Co., Ltd. To source other goods in China for our customers.
For more information about any of our series, or to place your requirement, please feel free to contact us directly. We hope to receive your detailed inquiry soon, and are looking forward to having the chance of cooperating with you in the near future.
