Product Specifications
| Markets: |
North America,South America,Southeast Asia,Western Europe |
| Application: |
Flooring |
| Morphology: |
Paste |
| Material: |
PU |
| Classification: |
Moisture Curing |
Product Description
PU Wood Floor Adhesive
1. DESCRIPTION
One-componment polyurethane wood adhesive is specially designed for direct elastic
Bonding of wood floors. It is wildly used because of the the excellent perforrmanece and convencient for application.
2. USES
Bonds many types of wooden parquet, strip and sheet wood flooring systems to concrete, wood or over existing floors.
Good for bonding wood and wood derivative and paper
3. ClEANING
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned. It is recommended that ground floor slabs be used with surface treatment agent if excessive moisture is present in the concrete.
4. PACKAGING
600ml sausage; 20kg/bulk
5. APPLICATION
Minimum application temperature: 5 c.
Remove lid off pail and cut open foil liner. Once opened, the entire contents of the pail should be used within a short period of time. Apply firm pressure when bringing components together and keep the joint under pressure for at least 3 hours until the adhesive has partially cured
6. ADVANTAGES
Excellent elasticity.
One-componment, moisture cured, convenience of application.
No solvent, no smell and odour after curing, environment-friendly,
No corrosion to substrates.
Excellent sound dampening qualities.
Good bonding quality.
Reduce reflection and noise.
7. ADVICE
For common occasion, after cleaning out the surface with organic solvent, this product can be used directly.
Please construct by application instructions strictly, failure of stickiness may be caused by any operation disobeying construction techniques.
This product is innocuous after curing completely, but before set, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. See doctor immediately if it is serious.
|
Testing Items |
Performance |
|
Density (g/cm3) |
1.35± 0.1 |
|
Solid content(%) |
≥ 96 |
|
Tensile Strength (Mpa) |
≥ 1.4 |
|
Shore A-hardness( A° ) |
35± 5 |
|
Elongation at break(%) |
≥ 500 |
|
Shrinkage (%) |
≤ 5 |
|
Tack free time(min) |
≤ 90 |
|
Extrudability (ml/min) |
≥ 120 |
|
Curing speed(mm/24h) |
3 ~ 5 |
|
Pollution properties |
Non |
|
Application temperature( ) |
+5 ~+35 |
|
Shelf life(month) |
9 |
