PVC Sg5 Powder Polyvinyl Chloride Resin PVC Resin

Product Specifications

Prod Model:	SG5
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Thermoplastic Plast:	PVC Sg5
Usage:	Specialty Plastics
Material:	Polyvinyl Chloride/PVC
Color:	White

Product Description

Product Details
Basic Info.
Material:PVC
 
Export Markets:Global
Additional Info.
Origin:Tianjin China
 
HS Code:39041000
Product Description
Product Description

HDPE High Density Polyethylene 
 
The description of HDPE High Density Polyethylene: 
 
HDPE High Density Polyethylene properties: 
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good. 
Application of HDPE High Density Polyethylene: 
For extrusion packaging film, rope, woven bags, fishing nets, water pipes; Injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; Extrusion blow molding containers, hollow products, bottles. 
 
Packing of HDPE High Density Polyethylene: 
Packed in 25kg/bag, 20MT / 20'FCL, or customized. 
 
Storage of HDPE High Density Polyethylene: 
Shelf life: It should avoid damp, contaminated and direct sun light during transport. And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together, and away from the fire. 
 
HDPE Film Grade 
PropertyUnit 
Typical Value 
Mass densityg/cm 30.941-0.959 
Melt flow Rate(190 centidegree /2.16kg)g/10min≤ 1.0 
Tensile yield strengthMPa≥ 19.0 
Flexural modulusMpa≥ 965 
Elongation break%≥ 400 
Impact Embrittlement temperaturecentidegreeMAX -118 
Dielectric Constant100kHz2.32 
1MHz2.31 
Loss Tangent100KHZMAX 0.0001 
1MHZMAX 0.0001 
Volume resistivity OHM-CMMIN 1X10 15 
Application 
Mainly used for the production of high toughness of the telephone, cable insulation material 
 
HDPE Injection GradeUNITVALUE 
Densityg/cm30.945-0.978 
MFR (1900C X 2.16KG)g/10min≤ 0.4 
Tensile Strength at YieldMpa≥ 16.0 
Tensile StrengthMpa≥ 20 
Elongation at Break%≥ 600 
Vicat Softening Point0C≥ 110 
ESCRh≥ 500 
EHCRh≥ 96 
Low Temperature Impact Strength0C-76 
Low Temperature Elongation at Break%≥ 175 
Carbon Black Dispersion≥ 6 
20 0C Volume ResistivityΩ @m≥ 1.0 X 1014 
Dielectric StrengthMV/m≥ 35 
HDPE Extrusion GradeTypical Value 
Mass density g/cm 30.941-0.959 
Melt flow Rate(190 centidegree /2.16kg)g/10min≤ 1.0 
Tensile yield strength MPa≥ 19.0 
Flexural modulus Mpa≥ 965 
Elongation break %≥ 400 
Impact Embrittlement temperature centidegreeMAX -118 
Dielectric Constant100kHz2.32 
1MHz2.31 
Loss Tangent100KHZMAX 0.0001 
1MHZMAX 0.0001 
Volume resistivity OHM-CMMIN 1X10 15