Quartz Sand Filter for Wastewater Treatment

Product Specifications

Prod Model:	YLD-SF-1400
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Material:	Stainless Steel/Carbon Steel
Flow Rate:	45-75 T/H
Form:	Bypass Water Filtration
Average Remove Rate:	92%--96%
Inlet Pressure:	0.2-0.6MPa
Filter Media:	Quartz Sand/Activated Carbon
Backwash:	Automatic
Thickness:	8mm
Inlet-Outlet Diameter:	2.5 Inch
Tank Diameter:	1400mm
Usage:	Water Treatment
Motive Force:	Electric power
Certification:	CE
Type:	Media Filter

Product Description

Quartz Sand Filter for Wastewater Treatment

Sand filters are used to remove suspended solids from water and wastewater. Because they have one layer of filter media, sand filters remove only relatively large solids (normally in the range of 40 micron and larger). The effective size of each granule of sand typically varies from 0.35mm - 1.2mm. Larger granules yield coarser filtration. Finer granules yield finer filtration.
Sand filters are typically used for:
·                                 Irrigation water
·                                 Storm water
·                                 Cooling water
·                                 Swimming pool water
·                                 Water in fountains and other water features
Removing suspended solids smaller than 40 microns requires filters with either two or three layers of filter media. These are referred to as dual-media filters or multi-media filters. When sized properly and with the correct configuration of filter media, these filters can remove suspended solids as small as 5 micron.
Units are skid-mounted, factory assembled, wired, and tested, and delivered ready for installation. Piping, valves, filter media, pressure gauges and accessories are included with filter systems. Solar power, media air scour, and rinse cycle are available as options. Filter systems are engineered to require little maintenance. A separate source of water supply or a pump for backwash are seldom needed.
 
Dual and Multi-media filters are typically used for:
·                                 Industrial process water
·                                 Waste water
·                                 Potable (drinking) water
The size of each filter, the number of filters required, and the type of filter media used depend upon:
·                                 how small a solid needs to be removed,
·                                 how dirty the water is,
·                                 how the water will be used once it is filtered,
·                                 and the source of backwash water needed to clean the filters.

Size of Solids to be Removed: The smaller the solid to be removed, the slower the water must pass through the media and the finer the granule of media must be. Very often the end user doesn't know how small a solid must be removed. In those situations, how the filtered water will be used will determine how small a solid should be removed.

FAQ:
 
01.  What is the capacity(m3/h or gpm)do you require?
02.  How dirty the water?
03.  How the water will be used once it is filtered,
04.  What is the power supply in your country?



Specifications:

model	Filter diameter	Height	inlet-outlet	Filtration area	capacity
	mm	mm	mm	m²	m³/hour
YL-SF-500	500	816	40	0.2	6~10
YL-SF-600	600	874	40	0.28	8~14
YL-SF-700	700	900	40	0.38	12~19
YL-SF-800	800	960	DN50	0.50	15-25
YL-SF-1000	1000	1200	DN50	0.79	23-39
YL-SF-1200	1200	1400	DN80	1.13	33-55
YL-SF-1400	1400	1600	DN100	1.54	45-75
YL-SF-1600	1600	1800	DN100	2.01	60-100
YL-SF-1800	1800	1950	DN150	2.54	75-125
YL-SF-2000	2000	2150	DN150	3.14	95-155
YL-SF-2200	2200	2250	DN150	3.80	115-190
YL-SF-2400	2400	2100	DN150	4.52	130-210
YL-SF-2600	2600	2400	DN150	5.30	145-225
YL-SF-2800	2800	2500	DN200	6.15	155-240
YL-SF-3000	3000	2600	DN200	7.00	170-255
YL-SF-3200	3200	2800	DN250	8.15	270-320