Product Specifications
| Prod Model: |
SDA |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Standard: |
Standard |
| Power: |
Pneumatic |
| Structure: |
Piston Cylinder |
| Material: |
Aluminum |
| Pressure Direction: |
Single or Double Acting |
Product Description
COMPACT CYLINDER
SDA SERIES
INSTALL AND APPLICATION
1. When load changes in the work, the cylinder with abundant output capacity shall be selected
2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion
3. Necessary protection measure shall be taken in the environment with larger humidity, much dust or water drops, oil dust and welding dregs
4. Dirty substances in the pipe must be cleared away before cylinder is connected with pipeline to prevent the entrance of sundries into the cylinder
5. The medium used by cylinder shall be filtered by the filter core of the above 40um
6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing
7. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually
released to avoid the damager on cylinder caused by excessive impact
8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust jam cap shall be added in
air intake and outlet orifices. The front and back cover can not be dismantled, which shall be especially noticed.
FEATURE
1. Standard cylinder manufactured by our company
2. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection
3. Hard oxidation treatment make the cylinder wearable and long service life.
4. The seal of piston adopts heterogeneous two way seal structure. It's dimension is tight and it has the function of oil reservation
5. Compact structure save space for fixing
6. Slot for the sensor fixing, make it convenient
7. There are several kinds cylinders for your choice
|
SPECIFICATION |
|
Bore size mm |
12 |
16 |
20 |
25 |
32 |
40 |
50 |
63 |
80 |
100 |
|
ActingType |
Double acting type |
|
Push out single action type,Pull back single action type |
_ |
|
Fluid |
Air |
|
Operating pressure |
Double acting |
0.1~1.0MPA(15~145PSI) |
|
Single acting |
0.2~1.0MPA(28~145PSI) |
|
Proof pressure |
1.5MPA(215PSI) |
|
Temperature |
"-20~80 |
|
Speed range mm/s |
Single acting : 50~500mm/s Double acting:30~500mm/s |
|
Stroke tolerance |
Stroke≤150 Stroke>150 |
|
Cushion type |
Bumper |
|
Port size |
M5*0.8 |
PT1/8 |
PT1/4 |
PT3/8 |
