Product Specifications
Prod Model: |
yy-02 |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Type: |
Sensor |
Material: |
PC |
Product Description
Auto seat sensor is a membrane touch point sensor and touch point was distributed uniformity on the suffer facade of seat, It is use to apperceive system of auto seat, such as safety belt alarm sensor, Taxi meter automatism.
We can design to different sensor figure and touch point sensitivity according to shape. rigidity and elasticity of car seat.
Dynamic pressure sensor
Pressure range: 0.1 N/cm2 - 100N/cm2
Output signal: resistance (R)
Thickfilm sandwich: 0.15mm - 1.0mm
Great durability: >10 million activations
Minimum active area: 5mm x 5mm
Customer specific design
Material: PC
Material surface thickness: 0.188mm
Output signal: resistance
Film thickness: 0.5-0.1mm
Bottom glue: PET 3M double-sided glue
Environment Temperature:-15ºC-80ºC
Permanence>150000 time
Pressure range single-spot test:70g 100% non-conducting
130g 100% conducting
Connector: seal gum
>
Minimum active area: 5mm x 5mm
Customer specific design
Performance Parameters Table |
Parameter | Condition | Sign | Numerical Value | Unit |
|
|
| Min | Max |
|
Working Voltage |
| U working | 0 | 20 | V |
Working Current |
| I Working | 0 | 50 | mA |
Non-trigger resistance value | No load | Rx=R No load | 10.0K |
| Ω |
Trigger resistance value | Bearing body | Rx=R Trigger | 0 | 100 | Ω |
Insulation impedance | No load | Rx=R No load | 10 | 20 | MΩ |
Specification |
Material | PC |
Material surface thickness | 0.188mm |
Output Signal | Resistance<100Ω |
Film thickness | 0.5+-0.1mm |
Bottom glue | PET 3MDouble-sided glue |
Enviroment Temperature | -15°C-80°C |
Permanence | >150000 Time |
Pressure range single-spot test(Special Poise) | 70g | 100%non-conducting |
| 130g | 100%conducting |
Connector | Seal gum |
To match as the seat |
Nanchang Qinglin Automobile Accessories Co., Ltd is a factory professionally produce seats and Auto parts. Our products are seats for bus and heavy trucks, construction machine, agricultural machine and garden tool machine. We also make some stamping parts and other auto parts.
Currently we have two bases making seats and other machinery parts: Nanchang, Jiangxi and Yangzhou, Jiangsu. With an area of 26000 square meters. Qing Lin has Annually output 400, 000PCS seats. Our Products are mainly for Domestic and Interantional OEM and Aftermarket. At Presenst, 40% Products are being exported to Europe and America etc Counties.
With high quality and favorable price, We're pleased to get your Inquiry and we will come back to you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.