Sewage Treatment Equipment

Product Specifications

Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Type:	Filter

Product Description

Oily Water Separator (OWS)
1. YWC 15ppm oil water separator for ship
2. Capacity (m3/h) 0.25-6.25
3. Power of pump (kw) 0.75-3.75
4. Less 1000 DWT

SWCB Sewage Treatment Seperator
1. Good quality
2. Competitive Price
3. Have CCS and EC Certifications
Sewage treatment unit adopt living beings is it oxidize law and materialization treatment disinfect principle punish the sanitary sewage of boat to exposed to. The structure form and performance of this device meet the demand for national standard GB10833-89 " technological terms of sewage disposal system of ship life ", the device is small, heavy and light, the structure is compact, the treated discharge water accords with the discharge standard of the national regulation, meet the discharge standard demand of knowing IMO MEPC/2 (VI ) of international Taiwan Strait Exchange Association's environmental protection at the same time. Device this made up of five chambers, crush room, two living beings is it oxidize the room, precipitate the room and disinfection room to contact.

SWCH Series Marine Sewage Comminuting and Disinfecting Holding Tank
This SWCH type Holding tank also can be a sewage comming and disinfecting system regulated by Annex IV of "MARPOL"73/78, for the temporary storage of sewage when the ship is less than 3 nautical miles from the nearest land, or transfer to a sewage treatment plant.
The Holding tank has the function of dosing disinfecting, sludge cutting, inner flushing and discharging the rreated sludge to go overboard, open sea or shore connection.
Simple structure, easy operation of the Holding Tank, which has been obtained the Certificate From CCS.

SWCM Marine Sewage Treatment Plant
This SWCM Marine Sewage Treatment Plant is applicable to treat the sewage, which means human body wastes and the wastes from the toilets on vessels and which is also called "black water", to meet the effluent standards of IMO MEPC. 159(55), and discharge the effluent to overboard. It is also applicable to treat galley & shower drainage which is called "grey water" on condition that the "grey water" should be pretreated and should select a bigger capacity model to match with.
SWCM Marine Sewage Treatment Plant belongs to the key devices for prevention of pollution form ships in seas and oceans according to the revised Annex IV of the International Convention of the Prevention of Pollution (MARPOL 73/78). The MEPC. 2 (VI) resolution adopted on 3 December 1976 is the present guidelines on implementation of effluent standards and performance tests for STP, which is called "old standards". This device is according to the MEPC. 159(55) resolution enacted on 13 October 2006, which is called "new standards". The convention (MARPOL 73/78) provides that all STPs installed on board on or after 1 January 2010 should meet the MEPC. 159(55) resolution.

YSF-Q series Marine oily water separator is according to the requirement of GB/T4795-1999 and IMO Marine Environment Protection Committee. The product can also be used to treat oily water in industry and its discharge standard is in compliance with the requirements of state Environment Protection Department besides of separating the bilge oily water on board.