Single Phase Surge Protector SPD
Price: |
US $ 2.5/Piece |
Trade Terms: |
FOB,EXW,CIP |
Min Order: |
1/Piece |
Pay Type: |
L/C,T/T,Western Union,Paypal |
Product Specifications
Prod Model: |
SUP1 |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
DC: |
1000V 500V |
AC: |
275V 320V 385V 420V |
Ka: |
5ka-100ka |
Certificate: |
CE |
Protection Class: |
IP40 |
Operating Temperature: |
5°c - +50°c |
Poles: |
1p 2p 3p 4p |
Max Working Volt: |
250V AC/30V DC |
Hard Wire: |
4-25 |
Flexible Wire: |
4-16 |
Type: |
Power Source Arrester |
Structure: |
Protective Gap |
Installation: |
Tandem Arrester |
Operation Voltage: |
DC1000V /DC500V / AC3880V or Other |
Certification: |
CE |
Brand: |
Suntree/OEM |
Product Description
Single phase surge protector SPD
Description:
Intensity of Remote Signalling Alarm Contact
Failure indication and centralized remote signalling alarm dry contacts;
High discharge capacity and low residual voltage;
Over-temperature protection;
IP20, UL94 V0
Model Number | SUP1 |
SPD according IEC 61643-1 | Class II |
SPD according EN 61643-11 | Type 2 |
Operating Temperature Range | -40ºC~+80ºC |
Relative Humidity | ≤95%(25ºC) |
Atmospheric Pressure | 86~106kPa |
Working Frequency | 50/60Hz |
Rated Working Voltage Uo | 230V/400V~ |
Max Continuous Operating Voltage Uc(L-N) | 275V/320V/385V/420V ~ |
Mode of protection | L-N/N-PE |
Nominal Discharge Current In(8/20μs)(L-N) | 20kA |
Max Discharge Current Imax (8/20μs) (L-N) | 40kA |
Voltage Protection Level Up(L-N) | ≤1.2kV |
Max. mains-side Overcurrent Protection | 80A(gL/gG) |
Cross sectional area for wiring terminal connected to conductor | Stranded:4~25mm² Solid Wire: 4~35mm² |
Max. Cross-sectional Area For Remote Signaling Interface | 1.5mm² |
Torque: wiring terminal/remote signaling interface | 2.5Nm |
Enclosure material | PBTV-0 |
Degree of protection(IP code) | IP20 |
Mounting | DIN35mm rails |
Solar DC SPD
The SUP series Surge Protection are designed to protect against lightning surge voltages in photovoltaic power supply networks.
These units must be installed in parallel on the DC networks to be protected and provide common and differential modes protection. The SUP series is available for the main operating voltages in photovoltaic: 1000 Vdc.
The use of SUP series Surge Protection is recommended at both ends of the DC power supply line (solar panel side and inverter/converter side),
Especially if the line routing is external and long. The electrical diagram of the SUN-S40 series is based on high energy PV equipped with specific thermal disconnectors and related failure indicators.
The SUP series is made with plug-in modules to allow a fast and easy maintenance in case of failure (disconnection from the DC network).
SUP2-PV series surge protector | SUP4-PV |
PV DC specific (LEC 6614-1/EN 61643-11) |
Pole | 2 pole | 3 pole |
Electrical Parameter |
Classifical test | II | II |
Uoc max (V DC) | 500 | 900 |
Uc (V DC) | 500 | 1000 |
In(8/20)us (KA) | 20 | 20 |
Imax(8/20)us (KA) | 40 | 40 |
Up (KV) | 2.0 | 3.8 |
Remote control and indication |
Indication window |
Plug-in module |
Remote signal contact |
Remote signal contact | Max working volt | 250V AC/30V DC | 250V AC/30V DC |
Max working amp 1A (250V/AC) | 1A (250V/AC) | 1A (250V/AC) |
1A (30V DC) | 1A (30V DC) | 1A (30V DC) |
Wiring & installation |
Wiring capacity(mm2) | Hard wire | 4-25 | 4-25 |
| Flexible wire | 4-16 | 4-16 |
Stripping length | 10 | 10 |
Terminal screwa | M5 | M5 |
Torque(Nm) | Main ciruit | 3.5 | 3.5 |
Remote signal contact | 0.25 | 0.25 |
Protection class | All profile | IP40 | IP40 |
Connection port | IP20 | IP20 |
Installation environment | No obvious shock and vibration |
Altitude(m) | ≤ 2000 | ≤ 2000 |
Working temperature | -3.0--+70 | -3.0--+70 |
Relative humidity | 30%-90% | 30%-90% |
How to install | Install with H35-7.5/DIN35 stell mounting rail |
Size(mm) (W*H*L) | W | 36 | 54 |
H | 90 | 90 |
L | 67.6 | 67.6 |
Weight (KG) | 0.25 | 0.38 |
Nominal PV system volt | 600V | 100V | 1200V |
MCOV(UCPV) | 700V DC | 1170V DC | 1200V DC |
Max system discharge Current (8/20us) (Imax) | 40KA | 40KA | 30KA |
Volt protection leve (UP) | ≤ 2.5KV | ≤ 4.0KV | ≤ 4.5KV |
Volt protection Level at 5KA (UP) | ≤ 2.0KV | ≤ 3.5KV | ≤ 4.0KV |
Integrate fuse breaking capacity/interrupting rating | 30KA/1000V DC | 30KA/1000V DC | 30KA/1200V DC |
Technology | Short-circuit interruption (SCI) overcurrent protection |
Operating temperature range | -40 to +80 |
Nominal discharge current | 12.5KA |
Response time (ta) | <25ns |
Operating state/fault indication | Green (good) / Red (replace) |
Mounting | 35mm DIN Rail per EN 60715 |
Degree protection | IP20 |
capacity | 3 modules DIN 43880 |
phone:008615067704943
Xinchi Electric Co., Ltd. is the best one, which stands out above the rest in China intelligent low voltage electrical field, meanwhile it is a grouping company in the "city of electrical".There are four branch companies subordinate to it:Yueqing Xinchi Electric Sci-Tech Co., Ltd, Yueqing Imp&Exp Co., Ltd, HK Yangming Electrical Technology Co., Ltd and Wenzhou Litto smart Co., Ltd.Moreover.There are 320 workers, the annual output value breakthrough one hundred million, and the export value arrive at ten million.
We always pay attention to manufacture and sell automatic industrial and control system, modular intelligent electrical equipments, such as circuit breakers, residual circuit breakers, contactors, isolators, solid state relay, control and protect switch, automatic transfer switch, electrical fire detecting system, surger protect device, multifunctional meter and new energy system fittings etc.
Especially DC circuit breaker, DC isolating switch, DC fuse, busbar chamber, waterproof switch and other products with leading technical level in this field...We are the first domestic company with CE, CB, IEC, Nemko, SAA, TUV, ISI and CCC certification.Our products are widely used by domestic famous enterprises, and it has become a OEM partner of many international famous brands.
We have fully implement the IS09001:2008 quality management system.It adopts advanced production equipment and precision detecting equipment, introduces high-tech process and high technology talents to provides powerful guarantee for product development, quality upgrading and management innovation of the company.
In order to seek after the excellence, Xinchi will continue to carry on the spirit of "practice, honesty, innovation, active", insist on the policy of " technology promotes industry, Brand promotes industrial", and we believe in "Technology innovation, famous in the world", working hard to let"XINCHI electric brand"walk towards to the world.