Product Specifications
| Prod Model: |
HYPAT Cellular Cable |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Application: |
Local Communication Cable |
| Conductor Material: |
Copper |
| Certification: |
CCC |
| Type: |
Skin/Foam Insulated Telecommunication Cables |
| Cover Material: |
Skin/Foam Insulated Telecommunication Cables |
Product Description
HYPAT Foam skin Insulated & PE Sheathed Jelly Filled Cables
APPLICATION
The cables are fully filled with petroleum jelly, being designed for use in access or trunk networks, from telephone exchange to subscriber area. The cables are suitable for
Installation in ducts and direct burial in the ground.
CONSTRUCTION
Conductors: Solid annealed bare copper0.64/0.9mm as per class 1 of BS 6360/IEC 60228.
Insulation: Cellular polyethylene as per BS 6234/BS EN 50290-2-23/IEC 60708.
Twisted Pairs: Insulated conductors are twisted into pairs with varying lay length to minimize crosstalk.
Cabling Element: Twisted Pairs.
Cable Core Assembly:
UNIT
Each unit shall consist of 10 pairs. Each pair, referred to by number, shall be coloured to
Comply with Table 1
Table 2 Tape color card
No. 1 2 3 4 5 6 7 8 9 10
Color Blue Orange Green Brown Gray White Red Black Yellow purple
6.1.1 Sub-Units
Sub-Units of 5 pairs (Pairs 1-5) and (Pairs 6-10) shall be formed from a unit of 10 pairs,
Each sub-unit being a compact bunch. In all cases the sub-units (Pairs 6-10) shall follow
Sequentially the sub- units (Pairs 1-5) and shall have the same colored tape lapping.
6.1.2 Single Units
Pairs 1-10 shall be stranded together into a compact bunch.
6.2 Unit Identification
Shall be applied over each sub-unit or single unit. The color of the tape shall comply with Table 2. The color sequence shall be from the centre to the outside. The tape is not required for 2-, 5- and 10 pair cables. The length of lay of the tapes shall not exceed 100mm when laid in the same rotation as the pairs.
Core Wrapping: One or more non-hygroscopic PE tapes are helically or longitudinally laid with an overlap. These tapes furnish thermal, mechanical as well as high dielectric protection between shielding and individual conductors.
Moisture Barrier (optional): An aluminium tape (0.15mm) coated with PE-copolymer both sides is applied longitudinally with overlap over the cable core to provide 100% electrical shielding coverage and ensures a barrier against water vapor. (20 for the following cables, aluminum belt USES a smoothing is applied to longitudinally wrap, is more than 20 pairs of cables, aluminum belt USES is embossing longitudinal package, in order to increase the bending performance. )
Filling: The cable core interstices are filled with petroleum jelly to avoid longitudinal water penetration within the cable. The water resistant filling compound is applied to the air space between non-hygroscopic tape and shield, shield and sheath within the cable core.
Sheath: Black higher density polyethylene as per BS 6234/IEC 60708, being able to withstand exposure to sunlight, temperature variations, ground chemicals and other environmental contaminants.
Ripcord: Ripcord may be provided for slitting the sheath longitudinally to facilitate its removal.
Spare Pairs (optional): NO Spare pairs
ELECTRICAL CHARACTERISTICS
Nominal conductor diameter mm 0.64 0.90
Maximum conductor diameter mm 0.65 0.91
Conductor Gauge Size AWG 22 19
Maximum Average conductor Resistance @ 20 Ω /km 58 28
Nominal Insulation Thickness mm 0.26 0.20
Nominal Insulation conductor diameter mm 1.16 1.60
Maximum Average Mutual Capacitance @1± 0.1kHz nF/km 56 58
Maximum Average Attenuation @ 150KHz 20dB/km 6.4 4.8
Maximum Average Attenuation @ 77KHz 20 dB/km 13.9 9.8
Maximum Individual Capacitance Unbalance @ 1000Hz pair-to-pair(for 99% cases) pF/500m 275 275
Maximum Individual Mutual Capacitance @01000Hz (for 99% cases) nF/km 60 30
Dielectric Strength Conductor to Conductor (1second) V. DC 550 550
Minimum Insulation Resistance @500V DC for 1000m at 20 MΩ . Km 1000 1000
MECHANICAL AND THERMAL PROPERTIES
Temperature range during operation (fixed state): -30° C ~ +70
Temperature range during installation (mobile state): -20° C ~ +50°
Minimum bending radius: 10 x Overall Diameter (unarmoured cables)
Established in 1993, Grand Ease Communication Co., Ltd. is a new and high-tech enterprise of Chinese and foreign investment located in Shunde of Foshan City, Guangdong Province. Our company specializes in the research, manufacture and sale of communication cables, communication optical fiber cables, digital cables, broadband cables and various special cables.
We have an annual production capacity of 1, 800, 000km of communication cables, 1, 500, 000km of fiber optic communication cables, 200, 000 cartons of LAN cables, and 40, 000km of special control cables. Our second stage expanded special cable production capacity can reach an additional 120, 000km.
Our company has passed ISO9001 certification standards, UL approved and most of our products are TLC certified. After years of effort, our products and services have earned a favorable reputation among customers and users. We export to Southeast Asia and other regions worldwide.
We uphold the principle of "Innovate everyday and creation has no limit", committed to supplying customers the latest in broadband terminal and FTTH products.
As we continue to expand in the communications field, our company looks forward to more cooperation from customers at home and abroad. For details, please do not hesitate to contact us.
