Product Specifications
| Prod Model: |
TW400 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Functions Fully Like Large Wave Machine: |
Suited for Any Through-Hole Part and Board |
Product Description
TW400 is the best benchtop wave solder machine with the most cost-efficiency, but it is functional over your expection, fully like the full-size wave solder machine, Please see details below:
1). It can run either leaded or lead-free process, its entire solder pot and carrier fingers are made of Titanium metal, the preheating temp. And time, the soldering temp. And time can be easily obtained with the settings of the temp. Controllers and timer.
2). It can run the heavy boards even with fixture. Its unique conveying system is powerful and balanced on the both side like the large full-size wave machine.
3). It can handle the long lead protrusion of the through-hole parts, its conveying/soldering angle and soldering nozzle can be fine-adjusted to fit for the different parts like the large full-size wave machine.
4). Minimum solder dross, the wave motor can be timing activated. When the board goes to the soldering pot, the wave is activated, the wave will not idle run. It can also save some energy.
5). Energy-saving, there are two control modes (auto and manual) for the preheaters, auto mode is for normal production, the preheaters will only work when the board is at the preheating process. Manual mode is for some special rework. The preheater will keep heating all the time, the manual/auto mode can be controlled with the switch.
6). Easy setup or installation, it no need the supporting facilities except for the basic electricity with our built-in air silent compressor and portable fume extractor(Options), and it can be placed/installed on the strong wooden crate which is shipped with TW400 for your convenient operation.
7). Easy maintenance, the flux and solder residues can be drained out by faucets and the solder pot can be moved out easily.
Features:
1. Compact size, ideal for electronic DIY, Training, teaching, R&D, laboratory testing, prototype, small-to-medium scale production run.
2. Much cost-efficient, with your lowest budget, it works fully like the large full-size wave solder machine.
3. Easy to use, a new guy can handle it after read the manual or watched the videos.
4. Small solder capacity and minimum solder dross, save your production cost.
5. Maximum output, a few boards (if small size) can be soldered at the same time
6. Intelligent conveying system, the board entrance and exit at the same position, only need one person to run it completely
7. Easy maintenance, the flux can be drained by faucet and the solder pot can be taken out easily
8. Independent and powerful cooling system, cool boards fast.
9. Energy-saving, the special design and configuration of the preheating and soldering system optimize the energy utilization.
10. Environment-friendly, only a little exhaust, if configured with our portable fume extractor(Option), no exhaust emission.
11. Easy to change the location, it can be moved easily with the wheels underneath the machine.
|
PCB Size |
50mmx50mm~400mm(L) x 350mm(W) |
|
Carrier |
Titanium Fingers |
|
Conveyor Speed |
Adjustable to 2m/min |
|
Fluxer / Capacity |
Foam Fluxer / Tank: 3 liters |
|
Flux Types |
Water Soluble, Resin Based & No Clean |
|
Preheater Type |
Infra-Red "Shot Light" |
|
PCB Preheat Timing |
Adjustable up to 20 Minutes
(1200 Secends) |
|
Solder Pot Capacity (Lead-free) |
Approx. 70kg |
|
Solder Pot Features |
Titanium, Single Wave, Wave Height Adjustable up to 15mm |
|
Heat Time |
Approx. 60~70 Minutes, Low Temperature Pump Detection |
|
Regulated Temperature |
up to 350°C |
|
Machine Size |
1300mm L x 820mm W x 620mm H |
|
Weight (Without Solder) |
Approx. 95Kg |
|
Air Pressure Requirements |
5Kg/cm 2 (70 psi), or built-in air silent compressor for no air pressure requirement(Option) |
|
Exhaust Requirements |
7.85L/Min (0.28CFM), or configured with our portable fume extractor for no exhaust emission(Option) |
|
Power Requirements |
220VAC 1 ph 50/60 Hz; 6.2KW (28Amp) |
Jobs Technology Limited is a pretty professional and well-experienced manufacturer and supplier who focus on developing, making and offering the economical and compact-size machines which are used on electronic manufacturing industry, our products includes solder paste printer, Pick and Place, reflow oven and wave soler machine special for PCB assembly process.
Jobs factory is located in Chang'an town, Dongguan city, on the border of Shenzhen, nearby Hongkong and Guangzhou, the manufacturing center of China, even the world, we develop and make our small and exquisite SMT machines and wave solder machine here.It is convenient and stable to work with our reliable and qualified material suppliers and easy to ship the finished goods out here.So we can offer you the good products in the short lead time all over the world.
Jobs team is made up of aggresive marketing executives, honest sales personnel, thoughtful design engineers, skilled and well-experienced manufacturing technicans, careful quality controllers, responsible logistics specialists, professional 24/7 service engineers and other staffs.All of our members work hard to offer you the best machines and service.
Jobs solder paste printer, Pick and Place, reflow oven and wave solder machine are easy-to-use, compact-size, lower-cost, energy-saving, environment-friendly and mostly functional as the large machines, so our machines are the best choice for hobbyist, laboratory staff, R&D engineer, school student and teacher, small-to-medium scale business owner.
Jobs solder paste printer, Pick and Place, reflow oven and wave solder machine have been selling all over the world including China, North America, Europe, Russia, South America, southeast Asia, Middle East, etc., most of our customers and partners are satisfied with our products and service.Thank all of our customers and partners for their nice cooperations and generous suggestions to keep Jobs on moving...
Hope Jobs Technology Limited can work with you soon and be your long-term partnership, Welcome!
