Product Specifications
Product Description
1. Diameter 1.5m, gross wight 16kg
2. Easily be installed
3. High quality and strong frame
4. Adjustable angle
5. Solar concentrate
6. Efficent cooking system for outdoor
Solar Cooker Manual
Installation steps (results show)
1. Select a flat ground, hem six sets of light reflection into a round plate, and then the use m6 screws make them a whole, and tighten the screws, (from the inside to outside the third screw holes is used to fix the pipe circle, this time not to screw the first screw)
Attention! In the assembly process must be protected the reflective film of set light board.
2. Fixed the square tube circle to the light board with screw m6, fixed the pipe loop and light board should be set in close contact, tighten the screws.
3. To stand on a flat ground, the pipes screwed into the base of the center screw in and tighten.
4. Screw the handle on a loose tube will have a long cross into the casing side of the hole.
5. Set light panels installed on the cross, with a cotter pin fixed.
(Note! Required to adjust the handle end up)
6. Screw one end of the lever handle into the side the length hole of pipe circle, stretching the other end to a long hole of the cross, fixed with the m8 screw, then adjust the nut side and upper and lower the active light board elastic fit.
7. The support pole into the hole on the cross, together with the supporting bar with m6 screws.
8. Install stove ring and the other end of supporting bar, fixed with screws.
9. While turning left and right of light board, while adjusting the handle on the base of the casing to make it elastic fit.
10. Solar cookers should be in the sheltered areas, Will not affect the lighting, fixed the base then solar cookers have been assembled.
Caution
1. Using solar cookers, the first on cardboard or wood stove ring, adjust the pot surface, so that spot at the focal center of the ring.
2. Use, usually tracking adjustment after every 10 minutes, so that spot always falls on bottom. Spot high-calorie; Adjust to be careful not to shine on the body or combustible substances, preferably operation on the back of solar cooker.
3. Keep reflective surface clean, not only can prolong life, but also the thermal efficiency reduced can be avoided, can be damped with wet and soft cotton cloth in water
4. The kitchen will face back to the sun when not in use, no flammable materials within 3 meters to avoid fire.
5. Cookware bottom should be painted black (light oil with smoked firewood or fees), can increase the heat absorption capacity, do not air burning cooking utensils, so as not to burn.
6. Cookers of the rotating parts should be lubricated regularly.
Taizhou Energy Pump, has been developing, manufacturing and marketing high quality water pumps for many year, located in Daxi Town, Taizhou City of Zhejiang Province, which is called the "pump town of China".
We can supply a comprehensive range of water pumps, such as 3'', 4'', 6'', 8'' deep well submersible pumps, sewage submersible pumps, clear water submersible pumps, self-priming jet pumps, peripheral pumps, centrifugal pumps, DC solar pumps; we can also supply gasoline generator from 0.65kw~7kw, diesel water pump with National Patent. Every component in every pump is thoroughly tested and runs through its complete running cycle. Then will be further tested as a complete unit, to assure reliability and performance. From engineering through manufacturing, we design our products to meet the highest quality standards. We are continually working to produce products that deliver the ultimate in performance and dependability.
At present, our pumps are exported to many countries and areas such as Europe, Southeast Asia, the Middle East, and South America, and have gained great reputation from our customers. We are looking forward to establishing mutual benefit and long-term business with more and more friends worldwide and warmly welcome your enquiry and visit anytime.
