Solar Garden Lighting

Product Specifications

Prod Model:	YF-159
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Color:	Brone
Size:	203*310*740mm
Material:	ABS
Lighting Time:	40-50h
Feature:	Disposable
Type:	Electronic Swatter
Pest Type:	Mosquito

Product Description

Feature:
1, The battery rated capacity of this product reach up to 6000mAH
2, Overling life span of battery, it can charge repeatedly more than 500times
3, Adopting 16 long life span, high brightness and imported white-light LED, and the time of the LED brightness up ti 10-20 hours
4, This product does well in killing the mosquito, which can electric shock a variety of mosquito effectively. Only use for killing the mosquito, it can use about 3days. (the concreteness depends on the number of the mosquito)
5, This product has the solar battery charging function. When it charge 8-10hours(according to the local sunlight), if only use solar battery charging, you no need to pay any fee about the electricity. In the same time, you also can use the adapter to connect the 220V mains charging. The charging time is about 6-8hours
6, This product has the function of activating light-operated. When the switch play in the ON state, and only use for killing the mosquito, and be the solar battery charging condition, the function of smart start and shut off, which is quite suitable for those environment no one watch over. Likewise, the function of killing mosquito does not start be the mains charging condition.
7, This product equip hook, plug seat, solar energy slice holder. It can put in any outdoor place and very convenient to operate.


How to use:
1, Selection: Use an appropriate number of fly-killer lamps according to the pests' denseness and the space's size, for achieving a better effect to kill pests.
2, Charging by solar: Place the solar panel under the sun, and connect the DC plug of solar panel to the DC socket of the lamp. It is charging when there is a lighting directive.


Charging by mains:
1, Make sure that the voltage and the power frequency is consistent with the adapter and the socket before using. Make the socket match with the product and let the socket's earth wire be well prounded. Then connect the adapter to 220V mains.
2, When the adapter connect to the DC socket, the indicator light will be shown, which means that it is charging.
3, Make the main switch to ON and the deputy switch to the lever of "purple light"(the lever of mosquito-killer), then the mosquito-killer lamp start to work, and the lamp is full of purple light. It must turn off the light in the room while turning on the mosquito-killer lamp so as to achieve a better effect to kill mosquito.
4, It is a normal phenomenon that there is a cracking sound when mosquito and fly strike to the network after the mosquito-killer or the fly-killer lamp starting to work.
5, Used for a time, see the following site lighting residues accumulta mosquitoes should promptly clean up, to clean up, you must switch to off place, holding a screwdriver insulation, metal rod with a screwdriver between the two grid sections network line contact for open circuit, discharge, and then unscrew by hand outside the net, remove the external network, right to clean nets.
6, Using white light illumination: Play the master switch on ON state, and play the auxiliary switch on white light illumintation state to start the white light illumination.


Notice:
1, When using the solar the solar battery charging, you should put the solar panel on the strong sunlight placce. Before using the mains charging, you must be fitted on the reliable ground wire.
2, The mosquito killer lamp should be put on the place where the kids can not touch. When the prodct works, don't put any electric conduction material into the high voltage(about 1000V) network edge avoiding the high-voltage shock.
3, When cleaning the mosquito killer lamp, you must cut off the power source and use the screwdriver to release the electricity from the high voltage network. When releasing the electricity, you must hold the insulation parts of the screwdriver avoiding the electric shock.