Features:
1. QHH74D type mechanical seals comply with ISO3069 standard, DIN24960, GB/T 6556 standards.
2. For stepped shafts
3. double seals
4. Balanced seal
5. Multiple springs rotating
6. Independent of direction of rotation
7. Seal concept based on the H7 range.
8. Variant with pumping screw available (H74F-D)
Advantages
1. Universal applications(standard mechanical seal)
2. Excellent compensation functioning equivalent, effective pressurization
3. Interchangable faces to keep it available easily
4. Extended selection of materials
5. Flexibility in torque transmissions
6. Insensitive to low solids contents
7. High pressure operating conditions are agreeable.
8. Axial loaded O-ring dynamically, easy and smooth, damage free
EN 12756 (For connection dimensions d1 up to 100 mm (3.94"))
9. Clean assembly
10. Long product lifecycle
11. Installation faults were avoided, damage- free and cost-effective.
12. Straightforward and easier specification for pre-assembly unit
13. Time saving( reduced down-time)
14. Self cleaning effect; Short Installation length possible (G16)
15. Individual adaptation is subject to pump's design and style.
16. Customized products(OEMs) are available
Recommended applications
1. Chemical industry
2. Special rotating equipment, mainly industrial process pumps
3. Pharmaceutical industry
4. Water treatment and sewage proposal
5. Petrochemical industry
6. Pulp and paper industry
7. Refining technology
Low solids content and low abrasive medium
Toxic and hazardous medium
Medium with poor lubrication properties
Adhesives
Chemical standard pumps
Technical specifications
ItemPart no. To DIN 24250Description
1.1472.1Seal face
1.2472.2Seal face
1.3474Thrust ring
1.4485Drive collar
1.5477Spring
1.6904Set screw
1.7412.1O-Ring
1.8412.2O-Ring
2475.1Seat (G9)
3412.3O-Ring
4475.2Seat (G9)
5412.4O-Ring
1) d1 > 100 mm: 2 mm X 30°
2) d1 > 100 mm: 30°
3) d1 > 100 mm: H7
4) d1 > 100 mm: +0.1
Conditions and Operating range
Sealed medium: liquid oxygen, methane, ethane, and so on liquid hudrocarbon, liquid natural gas
Shaft diameter: D1 = 14...200 mm (0.55" 7.87")
Pressure:
P1 = 80 bar (1, 160 PSI) for d1 = 14...100 mm,
P1 = 25 bar (363 PSI) for d1 = 100...200 mm,
P1 = 16 bar (232 PSI) for d1 > 200 mm
Temperature: T = -50 ° C...220 ° C (-58 ° F 428 ° F)
Sliding velocity: Vg = 20 m/s (66 ft/s)
Axial movement:
D1 up to 100 mm: ± 0.5 mm
D1 from 100 mm: ± 2.0 mm
Materials:
Metal parts: 316,304,2Cr13, multiple springs
Frictions components: Silicon carbide or hard alloy, Carbon graphite