Suppy Virgin HDPE Film Grade/HDPE Granules/HDPE Plastic Raw Material

HDPE-High Density Polyethylene
CAS: 9002-88-4
Grade: Blow molding grade, injection molding grade, etc.
High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum (in terms of energy and raw materials) to make one kilogram of HDPE.

Blow molding, injection molding pressuized pipes
High Density Polyethylene HDPE  polyethylene thermoplastic
HDPE masterbatch for plastic bags

Virgin  Recycled, High density Polyethylene resin




Specification:
Film grade:

Item	Test condition	Test Method	Value	Unit
Density		ISO 1183	0.944-0.955	g/cm3
MFR	190°C/2.16kg	ISO 1133	0.03-0.07	g/10min
Tensile strength at yield		ISO 527-2	22	MPa
Elongation at break		ISO 527-2	>350	%
ESCR	F50,50°C,100%	ASTM D-1693A	1000	h
VICAT		ASTM D-1525	126	°C

Blowing grade:

Item	Test Condition	Test Method	Value	Unit
Density		ISO 1183	0.950~0.955	g/cm
MFR	190°C/2.16kg	ISO 1133	1.7~2.5	g/10min
Tensile strength at yield		ISO 527-2	24	MPa
Elongation at break		ISO 527-2	>600	%

Injection grade:

Item	Test Condition	Test Method	Value	Unit
MFR	190°C/2.16kg	ASTM D-1238	20	g/10min
Density	---	ASTM D-792	0.954	g/cm3
Tensile strength at yiled	---	ASTM D-638	28	MPa
Elongation at break	---	ASTM D-638	250	%
Impact tensile strength	---	ASTM D-1822	42	kJ/m2
ESCR		ASTM D-1693	3	---
VACIT	---	ASTM D-1525	127	°C

Usages:
HDPE pipe grade can be used in the production of pressure pipes. Such as pressurized pipes, fuel gas pipelines and other industrial pipes. It can also be used for making non-pressure pipes such as double–wall corrugated pipes, hollow–wall wingding pipes, silicon–pipes, silicon–core pipes, agriculture irrigation pipes and Aluminums–plastics compound pipes. In addition, through reactive extrusion (silane cross-linking), it can be used for producing cross linked polyethylene pipes (PEX) for cold and hot water.