Product Specifications
| Prod Model: |
K12 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Type: |
Roofing and Waterproofing |
| Material: |
Acrylic |
Product Description
K12 Swimming Pool Waterproof Mortar is two-component, highly flexible cementitious mortar, to be applied by brush or roller, for waterproofing concrete surfaces such as foundations, retaining walls, balconies, terraces, basins and swimming pools and for protection against aggressive chemical agents.
DESCRIPTION
1. An alkali-reactive waterproofing product based on alkali resistant synthetically modified cement.
2. The K12 Swimming Pool Waterproof Mortar concept is based on the crystallization process.
3. K12 Swimming Pool Waterproof Mortar compounds combine with free water and other elements in the substrate to produce a waterproof membrane.
4. The unique and highly effective components of the K12 systems chemically react within the pores and capillaries upon exposure to the moisture and the elements.
5. This chemical reaction initiates the formation of the crystalline structure within the pores and capillaries, to become an integral part of the structure and block the passage of water.
6. K12 Swimming Pool Waterproof Mortar is a brush or spray applied,
7. Portland cement based system for waterproofing concrete and masonry through the crystallization process. K12 waterproofs the positive side or the negative side of the substrate.
8. Following proper application, active water pressures force the crystal forming chemicals deeper into the subsurface capillaries and pores to form a monolithic bond and become an integral part of the structure.
ADVANTAGES
1. Strong adhesive strength
2. Frost & deicing agent resistant
3. Impermeable and easy application
4. Good elasticity and also can be used with fiberglass mesh so as to enhance the crack resistant effect.
5. Superior chemical resistance and non-toxic
6. With good wear resistance
7. Ultimate resistance to the reaction of carbonation
8. Permeable to water vapor
9. Ultimate weather resistance
10. Provide better water resistance in complicating application surface compare to membrane-type and ensure better integrity between applied surfaces and waterproofing.
USES
1. K12 Swimming Pool Waterproof Mortar is applied to interior or exterior below grade surfaces and between horizontal structural slabs and toppings to protect against hydrostatic water pressure. These surfaces include concrete, concrete block and brick.
2. K12 Swimming Pool Waterproof Mortar can be used in a variety of installations, some examples being:
3. Suspended floors RC gutters
4. Terraces and balconies Patios
5. Precast Floor slabs
6. Basements and fountains
7. Retaining walls
8. Bathrooms, toilets and kitchens
9. Swimming pools and fountains
10. Culverts and tunnels
11. Roofs and balconies
12. Crack sealer
13. Protective coating
MIXING
Component B (liquid component) is poured into a clean vessel, and component A (powder component) is added, and mixed with a mechanical mixer (350 rpm) until no lump is left.
It is recommended to use low cycled (350 r/min) electrical mixer in order to make the mortar homogeneous.
PACKAGING: 25 kg powder craft bags. 13 kg latex plastic containers.
STORAGE
Shelf life is minimum 1 year when stored in covered and dry environment.
Production date is displayed on the packaging.
|
TEST |
TEST METHOD |
CURE TIME |
|
Adhesion Results (Avg. ) |
ASTME-149 118 psi on open structure 124 psi on closed structure concrete 74 psi on steel formed concrete 128 psi on clay brick 112 psi on concrete brick |
28 days |
|
Tensile Strength Results (Avg. ) |
ASTMC – 190 332 psi at 100% R. H 116psi at 50% R. H |
28 days |
|
Flexural Strength Results (Avg. ) |
ASTMC – 580 472 psi |
7 days |
|
Permeability Results (Avg. ) |
ARMY C. E CRD-C 48-55 2.6 x 10-8cm/sec (coats) 1.7 x 10-8cm/sec (3 coats) Tested at water heads of 4.3ft to 178ft |
7 days |
|
Pot Life: |
≥ 3 hours |
|
Initial Set: |
≥ 4 hours |
|
Final Set: |
≥ 5 hours |
|
Bending Strength |
After 2 days: |
After 28 days: |
|
≥ 5N/mm² |
≥ 22N/mm² |
|
Compressive Strength |
After 2 days: |
After 28 days: |
µ -Value: |
|
≥ 7N/mm² |
≥ 50N/mm² |
≥ 100 |
|
Chloride Content: |
≥ 0.002% |
|
Dynamic E-modulus after 90 days: |
≤ 30, 000N/mm² |
|
Adhesive Strength: |
≥ 3N/mm² |
|
Water impermeability at a water pressure of: |
a) 15m head of water (for 28days) Impermeable |
|
b) 70m head of water (for 24 hours) Impermeable |
|
c) 140m head of water on the Negative side for 200 hours Impermeable |
Gomix Co., Limited is one of the most well known construction material manufacturers in China. Over past many years, we sell various building material worldwide successfully. GOMIX mainly offer: Tile Adhesive & Grout, Wall Putty & Skim Coat, Textured Coating, Emulsion Paint, Waterproofing Slurry, and Insulation Materials.
GOMIX operates a manufacturing plant with 3 separate sets of production facilities to produce high quality polymer-modified cementitious construction materials. Our plant is equipped with the most up to date machinery and uses the latest European technologies to produce premixed dry mortar systems under the GOMIX brand.
Our company uses raw materials from reliable sources chosen for their reputation for stable and superior quality. Advanced high quality additives are imported from leading international suppliers to ensure consistent performance of all our products. The automated manufacturing plant is computer-controlled to ensure that all important parameters remain tight tolerances during the production process.
GOMIX also operates a stringent in-house quality control system to monitor product quality and ensures that the requirements of relevant standards or specifications are met at all times. Therefore, due to superior performance and consistent quality, our products are widely approved and used by most of the government departments and private developers in the region.
With the plant which is located in Guangzhou which is a logistic hub in South China, thus enabling our products to be distributed and delivered efficiently to any locations in the region with low cost.
GOMIX has a team of chartered engineers and material experts together with extensive laboratory facilities to enable products to be continuously developed through intensive research and a strong understanding of the local application conditions and constraints. Hence, we are able to develop and provide suitable premixed construction materials for wide applications to common structures as well as tailor-made products to suit for customers' special requirements of extraordinary applications in the region for example emulsion paint.
GOMIX has a pool of experienced material specialists, technical staff members and sales engineers to assist customers to select the most appropriate products for their needs. Besides, on-site support on product applications and other technical issues will be provided to ensure customer satisfaction and proper use of the products.
