Product Specifications
| Prod Model: |
kcs1006 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Thickness: |
6mm-200mm |
| Material: |
PTFE |
| Tensile Strength: |
Greater Than 15 Mpa |
Product Description
PTFE teflon sheet is manufactured by moulding method with PTFE granular resin. Teflon skived sheet is skived from billet. Thickness can reach 0.1, . 0.2, 0.3, 0.4, 0.5, 1mm, 2mm, 3mm, 5mm, 6mm. Width between 300mm to 2000mm
Maximum long term working temperature is 260° C. Maximum short term working temperature is 260° C.
Teflon sheet(including moled sheet and skived sheet) can be used in the food preparation, building industry, chemical industry, and also popular in the wear stripe and slideway within all types of engineering.
Molded sheet thickness from 3mm to 100mm, 500*500mm, 600*600mm, 1000*1000mm, 1200*1200mm...
The features of the standard fillers are as follows:
Glass Fiber: Increases compressive strength, rigidity and wear. Reduces creep and cold flow
Minimal effect on chemical and electrical properties
Carbon: Increases compressive strength, hardness, wear, and load properties. Good chemical resistance. Various types and amounts of carbon can be added to alter conductivity
Bronze: Increases hardness and wear resistance. Increases dimensional stability and compressive strength. Not suitable for corrosive or electrical applications
Molybdenum Disulfide: Increases hardness, stiffness, and wear. Minimal effect on chemical and electrical properties
Graphite: Reduces coefficient of friction. Reduces initial wear. Increases strength
Character/Properties
Interness to most chemicals
Resistance to high temperature
Low co-efficient to friction
Excellent dielectric properties
Chemically resistance
Relatively insensitive to power frequency
Zero moisture absorption
Excellent radiation resistance
Typical Applications
Printed circuit board construction
Flex circuit release sheets
Wire and cable insulation
Flexible hose construction
Gaskets
Non-stick surfaces
Bearing and abrasion resistant surfaces
High temperature and chemical resistant
|
length(mm)×width(mm) |
thickness (mm) |
|
Nominal |
Tolerance |
|
150×150 |
1.0-30 |
±0.30-±0.50 |
|
250×250 |
1.5-30 |
±0.30-±0.50 |
|
300×300 |
1.5-30 |
±0.30-±0.50 |
|
450×450 |
1.5-30 |
±0.30-±0.50 |
|
600×600 |
2-30 |
±0.30-±0.50 |
|
800×800 |
3-30 |
±0.30-±0.50 |
|
1000×1000 |
3-30 |
±0.30-±0.50 |
|
1200×1200 |
3-30 |
±0.30-±0.50 |
|
1000×2000 |
5-35 |
±0.30-±0.60 |
|
1500×1500 |
5-30 |
±0.30-±0.50 |
|
1800×1800 |
8-30 |
±0.30-±0.50 |
|
2000×2000 |
8-30 |
±0.30-±0.50 |
Zibo Kaichuang fluoride material Co., Ltd. is a professional PTFE material processing, technical develop company, which relies on the biggest supplier of PTFE raw material in Asian----Shandong Dongyue Group. All products were made from 100% pure Dongyue Group. Our technique level and quality were at the forefront of the same industry. We meet the Teflon™ Quality standards of DuPont Company. The product was applied by SINOPEC and CNPC etc.
PTFE material has unique performance in many fields such as: Chemical, oil, textile, food, paper making, and medicine, electronic, mechanical and other industrial and marine operations. Along with the development of technology application materials, PTFE material of the three major weaknesses: Cold flow characteristics, difficult to weld, and difficult melt processing will be gradually overcame and bring more broad application prospect.
