Product Specifications
| Prod Model: |
TDM-III-serial & TDM-serial |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Max Width: |
1.52meters |
| Refractoriness: |
200-450??C |
| Color: |
White |
| Material: |
Polypropylene |
| Apparent Density: |
Depends on Customer Request |
| Diameter: |
Depends on Customer Request |
| Surface Treatment: |
None |
| Usage: |
Garments Golves Tent |
Product Description
Thermel insulation description
TDM-III Series TEDA Themal insulation meets the standard GB 18401-2003( The National General Safety Technical Code for Textile Products). The material is safe to be used touching people's skin directly. It is an absolute green product.
This product has a bi-component structure, blended by polyester and polyolefin fine denier fibers, which can retains its insulating ability in damp conditions and dries quickly and easily. It features light, thin, soft, high thermal insulativity, washable, compressible, damp-proof and can provide a high breathability.
Note:1. Tested under pressure at 0.002PSI(1.37×10-3 N/cm2 ) :1.0.002PSI(1.37×10-3 N/cm2 ).
* Width available: 1.5meters (60inches) :1.5
* Material Composite: PP 65% / PET 35% :PP65%/PET35%
* Hydroscopicity: < 1% 1%
* :TDM-III ,.100mm150mm.
Use form: TDM-III can be directly used to laminated with other fabric to produce garments; and also can be available in forms that we laminated Spunbond scrim of one side or both sides of the insulation . The press point distance is 100 or 150mm.
Established in 2004, Tianjin TEDA Filters Co., Ltd. is one of the leading manufacturers of melt-blown based filtration materials for a wide range of environmental protection applications.
In the early 1990's, TEDA purchased the first melt-blown production line from the U. S. A with some special testing apparatus, including TSI8110, coulter porometer and Frazier ventilation tester. Therefore, we have accumulated professional experience in melt-blown material manufacturing for almost 15 years, which is really our valuable treasure to research and develop new materials all along.
Furthermore, we have bought another line which is the most advanced melt-blown production line made by Nordson Corporation USA in 2002, with the tester of TSI-8130. During the SARS spreading all over the world in 2003, we have this line busy on producing N95 media, which are used for respirator to protect people against SARS. And the TSI-8130 is the only one tester in China which can meet the international standard.
Now we have signed the contract with Neumag Company in 2006 to buy a newly developed melt-blown production line. This new equipment adopts bi-component technique, which can make the nonwoven fabric more porous and functional. The line is going to be started up on August 2007. This must make TEDA's production capacity larger and grade up our products greatly. From then on, our workshop will be moved to Tianjin Economic-Technological Development Area (west zone), where is near to Tianjin Xingang Port and Airport. As a result, we will be enjoying greater advantage in transportation.
Besides, we own patent for lamination technique, so that we can provide wide variety of composite materials for different end-users according to customer's request. Now we own two units of TSI-8130 testers to guarantee the product's quality. And we are granted ISO9001-2000 by LLOYD's Register Quality Assurance (LRQA).
For now, we have developed many series of products, including:
Air filter media: Ashrae grade, Sub-HEPA, HEPA, ULPA, and melt-blown compounded fabric for bag filter and pleat-type filter. Their end uses are very wide, such as Ashrae filters, vacuum cleaners, HVAC filters, auto cabin filters and bag house filters.
Liquid filtration media: Remove 0.5~10um particles
Filter media for facial mask and respirator: BFE95, BFE99, PFE99 (0.1um), N95, N99 (US NIOSH 42CFR-84 Standard), FFP1, FFP2, FFP3 (EU EN149: 2001 standard) grades are available
TEDA Mian (thermal insulation for garment): Newly developed PTFE wind-proof padding for high-cold zone using. And the padding has been provided to Chinese Army.
All of these products are popular in China and also have built a good reputation for Tianjin TEDA around the world.
Your inquiries will be given the utmost attention. Please feel free to contact us with detailed specifications. OEM orders are welcome. We are looking forward to cooperating with you in
Other Products From This Manufacturer
