Product Specifications
| Prod Model: |
DTSY150 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Accuracy: |
1.0, 2.0 |
| Display Type: |
LCD/LED |
| Output Voltage: |
110V/220V/230V/240V |
| Operating Temperature: |
-25 +60 Centigrades |
| Normal Working: |
-20~+55 Centigrades |
| Rated Frequency: |
50 / 60 Hz |
| Packaging: |
Packaging |
| Measuring Energy Range: |
0-9999.99 |
| Current: |
5(20)a, 10(40)a, 15(60)a, 10(60)a |
| Pulse Constant(Imp/Kwh): |
6400, 3200, 2400, 1600, 1200, 800, 400, 200 |
| Display: |
Digital |
| Installation: |
Direct Connected |
| Usage: |
Maximum Demand Meter |
| Electric Equipment: |
Three-phase Four-wire |
| Theory: |
Electronic Meter |
| Power Meter Connection: |
Terminal |
| Measured Signal: |
Pulse Peak |
| Type: |
Energy Meter |
Product Description
RADARKING IC card prepayment meter is an advanced energy meter that complies with increasing demand nowadays. Adopting advanced measurement technology, control technology and communication technology, RADARKING prepayment meter can not only measure power consumption accurately but also accomplish prepayment and load control management. With assist of SMT (surface mount technology), meter enjoys an elegant shape.
The material is friendly to environment, and it ensures insulation and corrosion resistance of meter case.
Function
1. Measuring three-phase active energy, no need to recalibrate for long-term operation;
2. Three-phase power supply can assure accurate metering in case of cut off in one line(either line of the three-phase three -wire energy meter) or two lines ( either two lines of the three-phase four-wire energy meter);
3. Output testing signal
4. Each user (meter) responds to a card, well protected from forgery;
5. Once the remaining power is approaching the alarming value, the LED will light to remind the user of timely purchasing;
6. When the remaining energy is 0, the meter will switch off automatically.
7. Power will be cut off automatically under overload for the convenience of capacity enlargement by the power Institution.
8. Wite-back function makes the power institution's management easier.
9. The exclusive IC card power selling management system has completed function of energy selling and energy-using supervision.
Punctual delivery time:
We carry out your order into our production schedule, ensure your punctual delivery time.
Production report before your order packed.
Shipping notice and photos sent to you as soon as your order is shipped.
After sales service:
We pay high attention to your feedback when receive the goods.
We provide 12 months warranty after goods arrive.
We promise all parts available in lifetime use.
We positively deal with your complain within 48hours.
Professional sales:
We value every inquiry sent to us, ensure quick competitive offer.
We cooperate with customer to bid tenders. Provide all necessary documents.
We are a sales team, with all technical support from engineer team.
| Rated Current | 5(60)A/10(60)A |
| Rated Frequency | 50Hz/60Hz |
| Meter Constant | 1000imp/kWh |
| Voltage Range | 80%Un~120%Un |
| IP Lenel | IP54 |
| Start Current | 0.4% lb |
| Voltage Circuit Power | 10VA |
| Current Circuit Power Consumption | ≤0.8VA |
| Communication Port | RS485*/Infrared |
| Prepayment Method | ESAM Module Encryption+IC Card |
Wuhan Radarking Electronics Corp. is a high-tech corporation which established in 2002. As professional manufacture in meters, our mainly products including: Full Digital IC Card Prepayment Electronic Meters, Smart Electronic Meters, IC Card Prepayment Water Meters, Gas Meters as well as Meter (network) Reading System. We are one of the few manufacturers in Hubei Province whose annual production of electronic meters and water meters can be up to 2.4 million sets.
Employee: There are more than 200 employees including 50 technicians, 10 senior technical staff and 70 employees who have already got college degree, 30 of them obtained metrological verification certificate. Production and technical staff all undergo a rigorous pre-service training, who are skilled and have a strong sense of quality.
Technology: We have a R & D group of 20 persons (About 10% of the company's employees).
Equipment: We have 260 sets of production and testing equipments, including 7 production lines, more than 20 units of the calibration device such as wave soldering machine, reflow soldering machine, automatic placement machine, plug-in assembly lines, assembly lines, packing lines and etc, which have all meet the production requirement.
Material: Materials are in strict accordance with the requirements of the meters and the procurement of national standards, we have already established a qualified supplier evaluation system, and developed a series of test standard. All the materials have to pass strict test before entering into factory, and then be used in production. Measures have been taken to prevent damp and static electricity to ensure the normal performance of the raw materials.
Craft: To make a variety of electronic meters in accordance with the production process, we have developed process documents, to ensure the quality of the products.
Test: We have electronic meter laboratory and full range of test equipments, such as EMC Equipment (ESD, EFTB, SURGE, RF, Attenuation Oscillasion Impulse, DIP, Impulse Current, Pulsed Voltage and etc), Environmental Test Equipment (Alternating Temperature Humidity Test Chamber, Dust Test Devices, Waterproof Test Device, Shock Test Device, Vibration Test Device and etc), R&D Testing Equipment. We make a variety of electronic meters in accordance with the test and develop our test documents to ensure the quality of the products.
Environment: Our production base covers an area of 30 acres, and self-building workshop covers an area of 7000 square meters, production and storage area covers more than 5000 square meters.
Management: We have a high efficiency, innovative, serious management team, and the factory has already passed ISO9001-2008 QMS.
