Product Specifications
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Signal Transmission: |
IR Remote Control |
| Application: |
Household Appliances |
| Type: |
Button |
Product Description
TV remote control/Remtoe Control of sky/TV remote control for sky+/TV remote control for sky HD
TV + SKY digibox
2\ OPERATING GUIDE
(TV + SKY digibox & TV + SKY digibox w/ Playback buttons)
2.1 Code Setup
<1> Press and release the TV button.
<2> Press and hold the Select and Red buttons together for 2 seconds, until the LEDlights up.
<3> Input the code numbers (4 digits) which found from the code list.
<4> After input the 4 digits code number, the LED will turn off if the code number iscorrect. If the code number is not in the list, the LED will flash twice and keep in the setup status, please back to the step <3>.
2.2 Set the TV channel for watching satellite TV
<1> Press and release the TV button.
<2> Press and hold the Select and Green buttons together for 2 seconds, until theLED lights up.
<3> Select the number of channel on your television that you use for watching satelliteTV.
<4> Press the Select button, the LED will be turn off.
2.3 Code Search
<1> Turn your television on.
<2> Press and release the TV button.
<3> Press and hold the Select and Red buttons together for 2 seconds, until the LEDlights up.
<4> Press 9 9 1, the LED will be flash.
<5> Aim the URC at your device, press and release the Power button slowly, the URCwill send the Power signal of next table. Check the television activate or not (Power off). Go to step <6> for activate or repeat step <5> for not.
<6> Press the TV button.
2.4 Test Mode (for Manufacturer use only)
Manufacturer can use this mode to test the keypad and transmission functions.
<1> Follow the Code Setup procedure to set TV's brand code as 9 9 9.
<2> The system going to check the internal ROM code (take about 2 seconds).
<3> The LED lights up then enters Test Mode if ROM code passed, or the LED flashes 3 times then enters Test Mode if ROM code failed.
<4> Press any button and the system will send out the Test Code of that key. with the Test Module can test each button is function or not. Repeat the step <4> until all thebuttons are tested.
<5> Press the TV button once to leave the Test Mode, the LED will turn off. (the TV button would be the last tested, it can leave the Test Mode at the same time. )
Remark: System will leave the Test Mode automatically when after 30 sec. Have not pressany button.
Founded in June, 2002, and in 2008 passed the ISO9001: 2000 (No. 11708 QU0181-09 ROS) the authentication, the company has a strong technical force and production, Quality management ability, and is a collection development, design, production as one of the major enterprise. The company has four Group, the main business scope is as follows:
1. The toy department: Professional development, design and production of various electronic toys, gifts and all kinds of plush toys voice, hair Light, wireless remote control, sonic, electric, magnetic control, recording the sound and intelligent voice conversations and other electronic module accessories.
A. Undertake customer OEM orders of sample preparation, production;
B. Machines our ODM products development, production.
2. The remote control division: The main design, development and production of television, electric appliances, learning the remote control, universal remote control, LCD display type of remote control, LED control ware and remote control combination of three nets remote control.
3. Energy-saving lamp division: The main development, the production, the sales LED to shoot the light, LED light bulb and LED lamp, LED soft light A, LED lamp, hard article.
4. PCB division: The main production of single PCB carbon oil single PCB, irrigation on carbon PCB production capacity is 30000.
