Energetic can produce UHMWPE parts as the drawings, feel free to send us your drawings. Energetic can provide a better solution to help you to save money and time. CNC machining, molded press and injection are our advantage, contact us, you will not be disapponited.
Our advantages:
High quality material
Closer Tolerances
Exact specifications
Competitive prices
Our service:
Beside UHMWPE, we also can machine these material as below:
HDPE(High density polyethylene)
Nylon(PA6, nylon6, polyamide)-MC nylon
POM(Derlin, Acetal)
PP
PVC
PTFE(Teflon)
PVDF
PPS
PEEK
Application:
We machine all types of Engineering Plastics to the Highest of Standards. We can machined these materials parts as your drawing. In general, our products can be applied in:
Marine
Mining
Rail
Food
Steel mills
Agriculture
Pulp and paper
Furnace and smelters
Transport
Crane
Building and construction
Refinery
Materials handling
General engineering
About UHMWPE Plate and Rod:
UHMWPE (also known as Ultra High Molecular Weight Polyethylene) Sheet and Rod products are manufactured from the semi-crystalline polyethylene (PE) family. Chinese UHMWPE Sheet and rods' maximum molecular weight can reach to 5 million which has a positive impact on material performance in an abrasive environment.
UHMWPE Advantages:
UHMWPE properties ensure that this plastic material is very light, extremely tough, chemically resistant and has excellent wear resistance.
Key Features:
Excellent sliding properties
High wear resistance
High impact strength
Very good chemical and corrosion resistance
Good noise absorption
Anti-adhesive
High energy absorption capacity and high stress rates
Temperature resistance from -200°C to +80°C
Physiologically safe
Applications:
Chemical Engineering: Corrosion and wear resistance mechanical parts
Thermal power: coal handling, storage of coal, warehousing chute lining
Coal processing: sieve plate, filter, U-underground coal chute
Concrete: cement raw and finished product silo lining
Grain: food storage or chute lining
Mining: sieve plate, chute linings, wear anti-bonding part
Food industry: star-shaped wheel, transmission timing bottle screw, bearings, guide rollers, guides, slide blocks, etc.
Note: Usually, the color and length can be customized, width will according to the available extrusion mould or molding mould. Tolerance for length, width, diameter and thickness may vary when manufacturing. More information, please feel free to contact us online or by email.
|
UHMW-PE Properties Data Sheet |
|
Technical Data |
Method of Verification |
Unit |
UHMW PE |
|
I.Physical Properties |
|
Density |
ISO 1183 |
g/cm3 |
0.96 ~ 0.98 |
|
Water absorption |
ISO 62 |
% |
0.01 |
|
|
|
II.Mechanical Properties |
|
|
|
|
Tensile strength at yield |
ISO 527-2 |
MPa |
17 |
|
Tensile strength at break |
ISO 527-2 |
Mpa |
40 |
|
Elongation at break |
ISO 527-2 |
% |
≥50 |
|
Modulus of elasticity after tensile test |
ISO 527-2 |
MPa |
650 |
|
Modulus of elasticity after flexural test |
ISO 178 |
MPa |
800 |
|
Hardness-Rockwell |
ISO 2039-2 |
|
- |
|
Hardness - Shore D |
DIN 53505 |
|
61 |
|
Charpy impact strength at 23C |
ISO 179 |
kJ/m2 |
>100 |
|
Friction coefficient |
DIN 53375 |
|
0.25 |
|
|
|
|
|
|
III.Thermal Properties |
|
Heat deflection temperature - HDT/A |
ISO 75-2 |
C |
42 |
|
Melting temperation |
IS0-3146 |
C |
135 - 137 |
|
Max. service temperature - Short term |
|
C |
120 |
|
Max. service temperature - Long term |
|
C |
90 |
|
Thermal conductivity at 23 C |
DIN 11359 |
W/(K*m) |
0.42 |
|
Coefficient of linear thermal expansion |
ISO 11359 |
10 -4* K -1 |
2 |
|
|
|
|
|
|
IV.Electrical Properties |
|
Dielectric constant at 1 MHz |
IEC 60250 |
10 6 Hz |
3 |
|
Dielectric loss factor at 1 MHz |
IEC 60250 |
10 6 Hz |
0.0001 |
|
Volume resistively |
IEC 60093 |
Ohm (Ω) * cm |
>10 14 |
|
Surface resisively |
IEC 60093 |
Ohm (Ω) |
>10 11 |
|
Dielectric strength |
IEC 60243-1 |
kV/mm |
45 |
|
|
|
|
|
|
V.Miscellaneous Data |
|
Flammability |
UL 94 |
Class |
HB |
|
|
|
|
|
|
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m |
|
|
|
|
|
|
Statement: |
|
|
|
|
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Energetic will not provide any legally binding guarantee of certain properties, or any suitability. |
Established in 2011 as a dedicated supplier of Engineering Plastics, Energetic is recognised as a leading supplier in the Chinese market, with a focus on Engineering and Industrial materials. Energetic has developed a reputation for service, quality and the ability to advise our customers on "right material with high cost-performance from China". Based on our own plant of POM extrusion, meanwhile the support of our professional manufacturers, Energetic brings to the worldwide market high quality rods, sheets, tubes and other specialty state-of-the-art plastic materials, which include
- Gerneral Plastic: HDPE sheets, HDPE rods, PP sheets, PP Rods, PVC sheets, PVC rods, ABS sheets, ABS rods, HIPS sheets, HIPS rods
- Engineering Plastic: POM sheets, POM rods, PTFE sheets, PTFE Rods, PA6 sheets, PA6 rods, PC sheets, PC rods, UHMWPE sheets, UHMWPE rods, PVDF sheets, PVDF rods
- High Performance Plastic: PPS sheets, PPS Rods
- Insulation Materials: Phenolic Paper Sheets, 3025 Phenolic Cotton Sheet, 3240/FR4 Epoxy sheets & rods, alternative Durostone Sheet CAS761
Our major warehouse is located in the Shenzhen, a seaside city, with a unequalled geographic advantage and mature logistic convenience, we are able to send these heavy cargos to our global clients by sea. We also support a network of distributors strategically located to service those needs of regional areas throughout all over the world.
With many years of experience in the plastics and engineering field, our able and dedicated staff member are qualified to solve your industry problems, answer your questions and satisfy your material needs.
