Useful Portable Auto Car Vacuum Cleaner Vehicle Mini Dust Cleaner

Mini Dust Cleaner(WIN-602)

Specification:

Specification	1Input Voltage			DC 12V
	2Output Current			7-8A
	3Output Power			80-90W
	4Power Source			DC cigar-lighter with fuse
	5Rotational Speed(Brushless motor,all copper)			34000rpm
	6Vacuum			2.2-2.4 KPA
	7Switch			ON/OFF
	8Wire Cord			260CM
	9Product Weight			815+/-5g, top part with motor(ABS)+ bottom black bucket(PP)
	10Vacuum hose weight			75g   100CM   PVC
	11Nozzle attachment			10G+/-1.5g  ABS
	12crevice attachment			24g+/-1.2g   ABS
	13Brush attachment			54g+/-2g    ABS
	14Brush			14g+/-0.6g   PP
Product Size&Packing	1Product Size			24 × 23 × 24  (CM)
	2Packing			color box
	3Quantity per Carton			12PCS
	4Packing Size			67x45x52cm
	5N.W/G.W.			15  /  17KGS

Manual Instruction:

Assembly and Operation
1. Check that the permanent filter completely covers the motor opening.Important!
Never operate the appliance without the filter.
2. Place the appliance upper section on the dust collector
3. Fasten the 3 fastening clips by hooking onto the dust collector at bottom and pushing up.
4. Insert the end of the suction hose in the suction opening.
5. Connect supplied accessories to vacuum cleaner according to intended application.
Fasten the required nozzle to the other end of the suction hose. The floor nozzle is very suitable for vacuuming dirt
on vehicle floor and seats and in the boot. Attach the brush to the floor nozzle to removed driedon dirt and fluff
(hook on at top, press down and clip into place). The slot nozzle is particularly suitable for areas that
are not easily accessible such as corners, edges and narrow gaps.
6. Insert the plug into the cigarette lighter socket of your vehicle or boat. Please make sure that the supply voltage is 12 V .
7. Switch on the vacuum cleaner with the ON/OFF switch  and press the switch in direction ON. Make sure the vacuum
cleaner's air outlet does not get blocked while using the appliance.
8. After use, switch the appliance off again using the ON/OFF switch. Then remove the plug from the cigarette lighter socket.
Never remove the plug by pulling the cable. Store any accessories not being used in a safe place.
Emptying the Dust Collector
1. Switch the vacuum cleaner off and remove the plug from the cigarette lighter socket.
2. Undo the 3 fastening clips by pushing sideways and down. Lift the uppersection of the appliance off the
dust collector and empty it.
3. Remove the permanent filter and clean it by brushing and knocking. Place it back in the motor opening
so that it is seated flush. If the filter is very dirty,it can be washed clean in tepid soap suds.
Make sure that it has dried completely before putting back into the appliance.
Re-Assembly
1. Before reassembling, make sure that the filter is back in position.
Operating the vacuum cleaner without filter could result in irreparable damage to the appliance.
2. Put the upper section of the appliance back on the dust collector.
3. Fasten the 3 fastening clips by hooking onto the dust collector at bottom
Cleaning the Car Vacuum Cleaner
Use a dry or slightly moist cloth to clean the appliance. The ventilation slots can easily be cleaned with a brush.
Do not use chemicals or solvents such as petrol to clean the machine.
Never immerse the machine in water.

More professional service

1.Allowed OEM project
2.Allowed printing your logos or brand
3.Any color can be selected freely for you
4.Any design can be made from you with us

Special instructions:If you are experiencing inflation will be stopped, this because your car's cigarette lighter power is insufficient, please directly from the battery connector electrical and air compressor can.
Notes:1)· the products cannot be used in large trucks;
2)when you use it you should start car's motor
3) If the rapidly increasing pressure for a short time (three seconds up to 689KPa), said the air pressure is blocked, the air does not enter the tire, turn off the power, remove the gas nozzle, do it again.
4) every 15 minutes, it is best to take a break;· only available for 12V cigarette lighter power supply input.

Company Name:Yuyao City Win Electric Appliances Co., Ltd.

Operational Address:NO.83, FENGMING ROAD, ECONOMIC DEVELOPMENT ZONE, IN YUYAO CITY, ZHEJIANG PROVINCE, China

Website:HTTP://www.Nbyywin.COM

Tel:+86-574-22227112

Mob:+86-13777202088

Fax:+86-574-22227114

Main product:Car fan, USB fan, camping light, spot light, warning light, working light, vacuum cleaner, air compressor.

Company profile:
Yuyao City Win Electric Appliances Co., Ltd.Is is a high-tech enterprise combines the design, research, manufacture, and export with service of car accessories products.Our company is mainly specialized in the manufacture and export of car fan, USB fan, camping light, spot light, warning light, working light, vacuum cleaner, air compressor.

Our company located in the suburb of famous historical city - Yuyao, Ningbo, Zhejiang, China.It just costs half an hour's drive to Ningbo and one hour and a half to Shanghai.
Since the company built in 2006, we hold the business tenet of "quality best, credit first, honesty and win-win"purposes, , which got the full recognition of the market with elegant styling, exceptional performance, top-ranking skill and good after-sales service.

Hope to build a long-term business relationship with your company.

Canister Vacuum Cleaner