Vertical Brush Filter with Manual Drive

Product introduction
Brush filter with manual drive is made up of the stainless steel wire brush, stainless steel strainer and rotating part. The washing device is installed at the inner side of the stainless steel strainer One handle is installed on the filter cover Turning the handle to lead the washing part to brush off the grain on the strainer, the grain will be discharged from the drainage entrance. The water flow will not stop during the brushing without machine halt and disassembly of the filter for washing the strainer.




Feature:
1.  used for filtering the grain impurities in the high flow, high speed, and low viscosity liquid
2.  high efficiency of filtering
3.  low running cost 
4.   successive filtering during the backwashing filtering
  Structure and working principle
 
The inside structure of the automatic self-cleaning brush filter is made up of the stainless steel strainer and stainless steel wire brush and transmission part. The washing and the drainage are automatically finished by the drive motor and electrical valve. The operation way is automatic running (manual running is also Ok), It is with the double function of the pressure difference and regularly automatic drainage. The automation part takes use of the most advanced and reliable PLC in the world.
 
When the water flow gets through the filter, the impurity in the water is held by the strainer With the increase of the impurity accumulated on the surface of the strainer, the pressure difference reaches 0.04Mpa. The switch of the pressure difference will give out a signal while the PLC sends an instruction to start the drive motor and open the drainage valve; The impurity accumulated on the strainer will be brushed off with the rotating brush and discharged from the drainage exit. The whole process of brushing and draining require no personal operation and without machine halt. At the same time, the equipment is with the function of regular washing and draining and manual washing and draining to make sure that the water output is safe and reliable in any case.
 
It could be extensively applied in the fields like metallurgy, chemical industry, power, injection water 
of the oil field and environmental water treatment.

The circulated or non-circulated cooling water system, heat exchange system, central air conditioning system and central heating system in the industries like architecture, chemistry, metallurgy, rubber, paper making, light textile, coal and foods, used to protect the cooling equipment, heat exchange device and air conditioner accordingly.


 

Technical parameters:

Model	Inlet and outlet parameter		Ø	H	S1	S2	Flow(T/h)	Motor(KW/r/min)	Weight (Kg)
	mm	in
YL-2Y	50	2	159	517	300	225	19	0.18/1400	80
YL-2.5Y	65	2.5	159	517	300	225	28	0.18/1400	100
YL-3Y	80	3	219	537	300	225	50	0.18/1400	130
YL-4Y	100	4	219	587	300	225	80	0.18/1400	150
YL-5Y	125	5	219	630	300	285	125	0.18/1400	180
YL-6Y	150	6	273	641	300	311	180	0.18/1400	230
YL-8Y	200	8	325	823	398	340	320	0.18/1400	280
YL-10Y	250	10	377	975	423	365	490	0.18/1400	320
YL-12Y	300	12	426	1000	438	365	710	0.18/1400	380
YL-14Y	350	14	478	1068	463	395	970	0.18/1400	450