Product Specifications
| Prod Model: |
JOT88 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Use: |
Rubber Coatings |
| Main Raw Material: |
Polyurethane |
| Method: |
Brush |
| Appearance: |
Liquid |
| Certification: |
SGS RoHS ISO9001 |
| Level: |
Floating Coat |
| Substrate: |
Aluminum |
Product Description
1. Technical data sheet
Note:
All data above ware tested under standardized condition.
All data listed in the chart were series; Please refer to the related datasheet for special items.
Storage condition has a direct impact to the products' shelf life, Please refer to the instruction for special items' storing.
2. DESCRIPTION:
Jot88 is is a kind of coating made by pure polyurethane. It is applied on substrates, to form a firm, soft and seamless sealing film by chemical reaction with moisture in the air. Jot88 is manufactured in accordance with the GB/T19250-2003.
3. USES:
Jot88 can be used for the waterproof construction of roof covering, toilet, basement, outside wall, water reservoir, sewage pond and swimming poll.
4. ClEANING:
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
5. PACKAGING:
700g sausage\20kg/bucket
6. APPLICATION:
The substrate should be smooth, solid, clean, dry without sharp concave and convex points, honeycomb, pocking marks, peeling, free of bulges, greasy before application. It is better coating 3 times with scraper. When the first coat isn't sticky, the second coat can be applied, the first layer is recommended being applied in thinner layer for better releasing gas generated during reaction. The second coat should be applied in different direction to the first coat. The optimal coating rate is 2.0kg/m² For thickness of 1.5mm.
7. ADVANTAGES:
* Pure polyurethane sealant, environment-friendly.
* Contains no asphalt, tar or any solvents, no harm to construction personnel.
* Easy for applying.
* Free from pollution to the environment, No toxity after curing, No corrosion to base material, High solid content.
* One component, convenient for construction, No need of mixing.
* All items tested exceeds nation standard GB/T19250-2003.
8. ADVICE:
* Jot88 should be inverted in dry and shady indoor, avoid sunlight
And moisture.
* It is normally that a film formed on the surface of coating. It can be
Used normally when removing the film.
* The rest coating should be sealed in order to avoid moisture.
* Pay attention to protect the waterproofing membrane during constructing
Period and after finished.
* Warehouses and construction of the site is strictly prohibited fireworks.
|
Testing Items |
Performance |
|
Appearance |
Red ,Green ,Gray ,White ,Black, etc. |
|
Method of application ( mm ) |
Self-leveling |
|
Tensile strength ( Mpa ) |
≥ 2.45 |
|
Elongation at break(%) |
≥ 700 |
|
Tear strength ( N/mm ) |
≥ 14 |
|
Tear propagation resistance (Mpa) |
≥1.5 |
|
Low-temperature bending |
≤ -35 |
|
waterproofness ( 0.3 Mpa 30min ) |
good |
|
Solid content/(% ) |
≥ 94 |
|
Tack free time(h ) |
≤ 2 |
|
Full cure time(/h) |
≤ 24 |
|
Hardness/A |
55±5 |
|
Shelf life(month) |
9 |
